All FC's are Tested and Shipped w/ BetaFlight 3.2.4.   Departing from Florida, U.S.A.  

5.8GHz Circular Polarized Antenna SMA

5.8GHz Circular Polarized Antenna SMA

Regular Price:

$8.00

These Boothead antenna are here to improve your video ! a PAIR - Rx and Tx - combination set - For FPV aerial photography 5.8Ghz - these skew planar 4 bladed 5.8Ghz cloverleaf style video Rx antennas give clear video vision (with or without OSD) and good colour with no colour shift inside normal Aerial photography radius of 1050m. Includes the matching 3 bladed Cloverleaf Tx antenna in this set. in direct Line-of-sight (LOS) these can be used out to 1.5km if operating at 400 ft alt. Antenna feature gold plated female connectors and bend-n-stay co-axial cables. Due to the short wavelength of 5.8Ghz it requires direct LOS - so you cant fly in rain, nor behind buildings . This ties in with legal requirements to maintain the aircraft in LOS.


Specifications: Gain: 5dB


i Antenna connector: SMA plug


 Standing wave ratio(SWR): <1.5 Length: 8cm (TX)/10cm(RX)


Weight: 12.5g(TX)/14g(RX

OR
 
Description

Details

 

  • Specifications:

    • Gain: 5dBi
    • Antenna connector: SMA
    • Standing wave ratio(SWR): <1.5
    • Length: 8cm (TX)/10cm(RX)
    • Weight: 12.5g(TX)/14g(RX
  • skew planar 4 bladed 5.8Ghz cloverleaf video Receiver antenna
  • matching matching 3 bladed Cloverleaf Tx antenna
  • Gain = 1.3 db (4 bladed Rx) 1.1 db (3 bladed Tx)
  • omni RHCP, Right Hand Circular Polarization
  • Beam = donut 360 ° degrees
  • Flat, solid copper wires - not plated 
  • if crashed - Note the case may break open in a hard crash and the user will have to Glue it back up - the 2 cases are only held together by 4 small plastic internally
  • This SET - Includes both Tx or Rx - warranty does not cover any type of crash or break from impact etc - We strongly recommend you put a few drops of extra-thin CA superglue on them seam of the grey lid (where the colour band is) before you fly.
  • RP-SMA Plug Female pin internally - gold plated connector - we also nip the antenna on with a spanner/wrench to make sure it does not loosen in flight. if you overtighten these they ill break
  • Rx 4 blade Ant Fits directly to Video Googles
  • Flight weight - 11.8grams
  • size = 100x35x35mm each
Reviews