All FC's are Tested and Shipped w/ NEWEST BetaFlight 3.5.1 (september 8th)! Departing from Florida, U.S.A.  

CC3D/Taulabs

Grid List

Set Descending Direction

4 Item(s)

  1. $35.00
    View Details

    NEW IN 1.0 V2 : ( new batch May 2015. tested and now shipping)

     Improved sensors filtering for ultra clear barometer readings. Buy with confidence!  The regulator and barometer on boards are the best quality on he market, in other words, business as usual. 

    NOTE: The color of the baord might be Blue or Black 

    This is a flight controller designed  for Tau Labs, but can also run cleanflight! . It is designed to be small and easy to assemble, while being highly capable for acrobatic flight, altitude hold, FPV, RTH or PH.

    How to load cleanflight video here

    Learn More
  2. $15.00
    View Details
    • Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM
    • 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer
    • Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
    • Software support for Windows, Mac and Linux
    • Direct high speed USB support with no drivers required, a truly plug and play device.
    • Spektrum satellite receiver support
    • Futaba S-BUS hardware support
    • Innovative Flexi-port technology for superior port flexibility
    • 4Mbits on-board EEPROM for configuration storage

    Flexiport

    CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.

    Superior user experience

    OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.

    The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!

    Sensors and Components

    • 3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000
    • Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers
    • Simultaneous support for multiple receivers
    • ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
    • MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
    • FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
    • 10 PWM outputs to servos or ESC’s, or for camera stabilization
    • Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers
    • Onboard USB connectivity for easy configuration
    • USB and serial telemetry and configuration (including wireless with optional radio modules)
    • Supported by powerful OpenPilot GCS
    • 4 Mbit onboard memory
    • 3C Quaternion based complementary filter running at 500Hz

    comes with 

    • Fully assembled and quality tested CC3D board
    • One - RC RX connection cable
    • Two - FlexiPort serial cables
    Learn More
  3. $19.00
    View Details

    The CC3D Racing Edition flight controller. Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size! By maximizing the spacing and layout the board was made smaller while still keeping all the functionality.

     

    • Black with white silkscreen
    • Micro USB Connection
    • Size (Board Only): 30mm x 17mm
    • Powerful STM32 32-bit micro-controller running at 90MIPs with 128KB Flash and 20KB RAM
    • 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer
    • Software support for Windows, Mac and Linux
    • Direct high speed USB support with no drivers required
    • Spektrum satellite receiver support
    • Futaba S-BUS hardware support
    • Innovative Flexi-port technology for superior port flexibility
    • 4Mbits on-board EEPROM for configuration storage

     

    comes with Radio cable. and cable for Flexi port

    Learn More
  4. Regular Price: $59.00

    Special Price $50.00

    View Details

    System information and components: STM32F405 168mhz 32bit arm cortex-m4 cpu with fpu, 192k ram and 1024k flash invensense MPU6000 3-axis accel and 3-axis gyro sensor honeywell HMC5883L 3-axis compass meas-spec MS5611 high precision barometer 32mbit spi flash memory up to 8 x pwm input, 1 x ppm input, up to 16 x pwm output, up to 2 x adc input up to 5 x uart, 2 x i2c, sbus, dsmx, mini usb, swd 50x50mm board size, 45x45mm mikrokopter style mounting schematics at http://github.com/taulabs sourcecode at http://github.com/taulabs binaries at http://jenkins.taulabs.org support at https://groups.google.com

    https://github.com/treymarc/baseflight/tree/f3f4

    Learn More

Grid List

Set Descending Direction

4 Item(s)