All FC's are Tested and Shipped w/ NEWEST BetaFlight 3.3.1! Most orders shipping same day!  Departing from Florida, U.S.A.  

KK Series

Grid List

Set Descending Direction

5 Item(s)

  1. Regular Price:

    $17.00
    View Details

    Designed by the Grand father of the KK revolution, Rolf R Bakke, exclusively for , the KK2.0 is the evolution of the first generation KK flight control boards. The KK2.0 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed. simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and your ready to go! all of which is done with easy to follow on screen prompts!

    The original KK gyro system has been updated to an incredibly sensitive dual chip 3 Axis gyro and single chip 3 axis accelerometer system making this the most stable KK board ever and allowing for the addition of an Auto-level function. At the heart of the KK2.0 is an Atmel Mega324PA 8-bit AVR RISC-based microcontroller with 32k of memory. An additional 2 motor output channels have been added to the KK2.0 allowing for a total of 8 motors to be controlled (Octocopter). A handy Piezo buzzer is also included with the board for audio warning when activating and deactivating the board.

    If your new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.0 was built for you. The 6 Pin USBasp AVR Programming interface ensures future software updates will be quick and easy.

    Specs.
    Size: 50.5mm x 50.5mm x 12mm
    Weight: 21 gram (Inc Piezo buzzer)
    IC: Atmega324 PA
    Gyro: InvenSense Inc.
    Accelerometer: Anologue Devices Inc.
    Auto-level: Yes
    Input Voltage: 4.8-6.0V
    AVR interface: standard 6 pin.
    Signal from Receiver: 1520us (5 channels)
    Signal to ESC: 1520us
    Firmware Version: 1.2

    Note: Buzzer is NOT included

    Here are some How-to Vids:

    Part 1

    Part 2

    Part 3

    Part 4

    Part 5

    Pre-installed firmware.
    Dualcopter
    Tricopter
    Y6
    Quadcopter +
    Quadcopter X
    Hexcopter +
    Hexcopter X
    Octocopter +
    Octocopter X
    X8 +
    X8 X
    H8
    H6
    V8
    V6
    Aero 1S Aileron
    Aero 2S Aileron
    Flying Wing
    Singlecopter 2M 2S
    Singlecopter 1M 4S
    (Custom Mix via the "Mixer Editor" option)

    The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.


    Whats is a Multi-Rotor Control board you ask?


    The KK2.0 Multi-Rotor controller is a flight control board for multi-rotor Aircraft (Tricopters, Quadcopters, Hexcopters etc). Its purpose is to stabilize the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega324PA IC. The Atmega324PA IC unit then processes these signals according the users selected firmware and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilizes your multi-rotor craft.

    The KK2.0 Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega324PA IC via the ail, ele, thr and rud inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).

    Learn More
  2. Regular Price:

    $19.00
    View Details

    Preloaded with Awesome Steveis V1.19S1 (newest. DEC.4. 2014!)  Pro Firmware for easy setup.

    Designed by the Grand father of the KK revolution, Rolf R Bakke, exclusively for , the KK2.0 is the evolution of the first generation KK flight control boards. The KK2.0 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed. simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and your ready to go! all of which is done with easy to follow on screen prompts!

    The original KK gyro system has been updated to an incredibly sensitive dual chip 3 Axis gyro and single chip 3 axis accelerometer system making this the most stable KK board ever and allowing for the addition of an Auto-level function. At the heart of the KK2.0 is an Atmel Mega324PA 8-bit AVR RISC-based microcontroller with 32k of memory. An additional 2 motor output channels have been added to the KK2.0 allowing for a total of 8 motors to be controlled (Octocopter). A handy Piezo buzzer is also included with the board for audio warning when activating and deactivating the board.

    If your new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.0 was built for you. The 6 Pin USBasp AVR Programming interface ensures future software updates will be quick and easy.

    Specs.
    Size: 50.5mm x 50.5mm x 12mm
    Weight: 21 gram (Inc Piezo buzzer)
    IC: Atmega324 PA
    Gyro: InvenSense Inc.
    Accelerometer: Anologue Devices Inc.
    Auto-level: Yes
    Input Voltage: 4.8-6.0V
    AVR interface: standard 6 pin.
    Signal from Receiver: 1520us (5 channels)
    Signal to ESC: 1520us
    Firmware Version: 1.2

    Here are some How-to Vids: Part 1 Part 2 Part 3 Part 4 Part 5

    Pre-installed firmware.

     

    Learn More
  3. Regular Price:

    $22.00
    View Details

    KK Mini Multi-Rotor Flight Control Board (dupont style)

    Preloaded with Awesome Steveis V1.19S1 (newest. DEC.4. 2014!)  Pro Firmware for easy setup.  

    The kk2.1.5 is the newest version of the famous KK2 flight control board. These boards are capable of very smooth flight and virtually any frame configuration.

    The KK-mini is packing all the same power, but with a new mighty-mini form factor.The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don’t let its size fool you as it's just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.

    A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

    The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.
    The KK-Mini added polarity protection to the voltage sense header. The voltage sense line has been updated for better accuracy.
    If you’re new to multi-rotor flight or have been unsure about how to setup a KK board, then the KK-Mini was built for you. The 6 PinSH USBasp AVR programming interface ensures future software updates will be quick and easy.

    Learn More
  4. Regular Price:

    $22.00
    View Details

    KK Mini Multi-Rotor Flight Control Board 36x36mm (30.5x30.5mm)

     Preloaded with Awesome Steveis V1.19S1 (newest. DEC.4. 2014!)  Pro Firmware for easy setup.  

    The KK-mini is packing all the same power, but with a new mighty-mini form factor.The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don’t let its size fool you as it's just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.

    Used the same screen like the  first and second  generation so the parts are easy to find!

    A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

    The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.
    The KK-Mini added polarity protection to the voltage sense header. The voltage sense line has been updated for better accuracy.
    If you’re new to multi-rotor flight or have been unsure about how to setup a KK board, then the KK-Mini was built for you. The 6 PinSH USBasp AVR programming interface ensures future software updates will be quick and easy.

    Learn More
  5. Regular Price:

    $22.00
    View Details

    KK MINI AIR - now Fly a KK 2.1.5 with NO screen onboard.

    Preloaded with Steveis V1.19S1 Pro Firmware for easy setup.!

    With the screen on its own programing box card, plug it in at the field to make your settings changes without a computer, then remove the screen so your will never have to replace it in a crash 

    Great for a new racing quad flying or anyone who likes the KK fimware, but does not need or want the added weight or fear of breaking the screen.

    Super light.  Board size normal  (35X35MM)

    Learn More

Grid List

Set Descending Direction

5 Item(s)