All FC's are Tested and Shipped w/ BetaFlight 3.2.2.   Departing from Florida, U.S.A.  

Nano Sized-20x20mm mounting

Grid List

Set Descending Direction

1-10 of 13

Page:
  1. 1
  2. 2
  1. Regular Price:

    $34.99
  2. Regular Price:

    $19.99
    View Details

    The Flip32 F4 NANO now in 20x20mm mounting hole size (3m holes). This is a powerful flight controller in the 20x20 format with no OSD. 

    • STM32 F405 MCU (Spi connected to Gyro)
    • powerful ICM (the 6 axis SPI Gyrometer + Accelerometer)
    • D-shot Support
    • SBUS/PPM + DSMX Ports
    • LIPO direct input (2-4S). 4s supported
    • 20x20mm  w/ M3 holes

    This  Flip32 F4 Nano Flight controller with a packs a punch using the MPU6000 over SPI for the best possible flight performance on smaller crafts. Powerful F4 but with small 20x20 hole size with 3M sized holes can take direct 2S-4S power-in

    Learn More
  3. Regular Price: $29.00

    Special Price $20.00

    View Details
  4. Regular Price: $24.99

    Special Price $19.99

  5. Regular Price: $27.99

    Special Price $25.99

    View Details

    All units are tested and flashed with stable BetaFlight 2.3.1 . Take advantage of all the new features, Automatic Notch filter, turtle mode, Camera control,SmartAudio, Increased motor output resolution, OSD improvements, and much , more

    The Flip32 OMNIBUS F3 NANO in 20x20mm mounting hole size (3m holes). Target "OMNIBUS" to update the firmware. Build-in power distribution board PDB with current sensor on board. 2-4s cell battery , current and Voltage readings on the OSD. The Omnibus Flight controller line has proven itself to be one of the most reliable,speed, and feature packed boards out today. Taking the features and setting the standard by which all other flight controllers are measured.  Leading with way with features like a powerful F3/F4 processor, Betaflight OSD, current sensor, VBatt, 5v 1.5-3A BEC output, MicroSD Black Box, video output filter, and the ability to tune PIDs over video or transmitter, the list keep on growing. Now attempted been to be copied by others, that might not have all the knowledge / customized chips (OSD, 5v). RTFQuads  will always have the freshest & newest genuine OMNIBUS total flight controller line up.  A portion of the flight controller sales goes toward BetaFlights developers  to make sure the firmware keeps growing, and adding more features. Orders are sent with correct updated documentation papers included with the board,only here we special reinforced Golden USB plug and Pin-headers in the bag. Beware of other shops claiming V3 or other ,make sure yours is a best available today,  always tested and flashed the the newest Betaflight firmware.For racing or freestyle we know you demand the ultimate level of precision and accuracy the Flip32 Omnibus FC will deliver. STM32 controls OSD chip over SPI in DMA mode, less CPU using, faster rate.

    Features:

    • STM32 F303 MCU (Spi connected to Gyro)
    • MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
    • "Drag and Drop" OSD (configured over Betaflight UI)
    • D-shot Support
    • Target "OMNIBUS" to update the firmware
    • SBUS/PPM + DSMX Ports
    • 5v1.5a Clean Sbec /w On-Board Video Filter
    • Built-in Current Sensor voltage + rssi + buzzer as pins
    • Built in PBD ( 60 AMPS sensing) 
    • Barometer
    • OSD Configation has been incl. in Betaflight GUI.
    • LIPO direct input (2-4s)
    • 20x20mm  w/ M3 holes
    • Note: This is the newest V3. the board color can be Black or Blue.

    This  Flip32 Omnibus F3 Nano Flight controller with a packs a punch using the MPU6000 over SPI for the best possible flight performance on smaller crafts. Also on-board are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD, and smart Audio Support. Powerful F3 but with small 20x20 hole size with 3M sized holes can take direct 2S-4S power-in, the on-board BEC will work for 2s-4s will support the Current sensors and voltage readings still supported over OSD, but will not have a BEC power on 4s.  This FC  will also be capable of replacement for PDB allowing you for super tight build connecting the ESC to the FC.

    Learn More
  6. Regular Price: $34.99

    Special Price $29.99

    View Details

    The Flip32 OMNIBUS F4 NANO now in 20x20mm mounting hole size (3m holes).The only place with a Data flash chip option installed on the board, and a free cable. Target "OMNIBUS F4" to update the firmware. With F4 and Betaflight OSD. 2-4 cell battery supported. 4s is currently supported with WITH onboard BEC , just connect to the FC and it will power., but you can still have the current and Voltage readings on the OSD, and is supported. The Omnibus Flight controller line has proven itself to be one of the most reliable,speed, and feature packed boards out today. Taking the features and setting the standard by which all other flight controllers are measured.  Leading with way with features like a powerful F3/F4 processor, Betaflight OSD, current sensor, VBatt, 5v 1.5-3A BEC output, MicroSD Black Box, video output filter, and the ability to tune PIDs over video or transmitter, the list keep on growing. Now attempted been to be copied by others, that might not have all the knowledge / customized chips (OSD, 5v). RTFQuads  will always have the freshest & newest genuine OMNIBUS total flight controller line up.  A portion of the flight controller sales goes toward BetaFlights developers  to make sure the firmware keeps growing, and adding more features. Orders are sent with correct updated documentation papers included with the board,only here we special reinforced Golden USB plug and Pin-headers in the bag. Beware of other shops claiming V3 or other ,make sure yours is a best available today,  always tested and flashed the the newest Betaflight firmware.For racing or freestyle we know you demand the ultimate level of precision and accuracy the Flip32 Omnibus FC will deliver. STM32 controls OSD chip over SPI in DMA mode, less CPU using, faster rate.

    • STM32 F405 MCU (Spi connected to Gyro)
    • MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
    • "Drag and Drop" OSD (configured over Betaflight UI)
    • D-shot Support
    • Target "OMNIBUS F4" to update the firmware
    • SBUS/PPM + DSMX Ports
    • 5v1.5a Clean Sbec /w On-Board Video Filter
    • Built-in Current Sensor voltage + rssi + buzzer as pins
    • Barometer
    • OSD Configation has been incl. in Betaflight GUI.
    • LIPO direct input (2-4S). 4s supported
    • 20x20mm  w/ M3 holes

    This  Flip32 Omnibus F4 Nano Flight controller with a packs a punch using the MPU6000 over SPI for the best possible flight performance on smaller crafts. Also on-board are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD, and smart Audio Support. Powerful F4 but with small 20x20 hole size with 3M sized holes can take direct 2S-4S power-in,  This FC  will also be capable of replacement for PDB allowing you for super tight build connecting the ESC to the FC. For 3.3Volt power please use the boot pin

    Learn More
  7. Regular Price:

    $34.99
    View Details

    The Flip32 OMNIBUS F4 NANO LC is a good option if you do not need a Data flash Logger on board, and you power the camera via the FC. If not the cheaper Nano V2 will be the same results. If you need a Data flash the V2 is the same layout with a Memory chip. This flight controller takes away the black box, but add a small filter to the power line on the Camera connecor now in 20x20mm mounting hole size (3m holes).Target "OMNIBUS F4" to update the firmware. With F4 and Betaflight OSD. 2-4 cell battery supported. 4s is currently supported with WITH onboard BEC , just connect to the FC and it will power., but you can still have the current and Voltage readings on the OSD, and is supported. The Omnibus Flight controller line has proven itself to be one of the most reliable,speed, and feature packed boards out today. Taking the features and setting the standard by which all other flight controllers are measured.  Leading with way with features like a powerful F3/F4 processor, Betaflight OSD, current sensor, VBatt, 5v 1.5-3A BEC output, MicroSD Black Box, video output filter, and the ability to tune PIDs over video or transmitter, the list keep on growing. Now attempted been to be copied by others, that might not have all the knowledge / customized chips (OSD, 5v). RTFQuads  will always have the freshest & newest genuine OMNIBUS total flight controller line up.  A portion of the flight controller sales goes toward BetaFlights developers  to make sure the firmware keeps growing, and adding more features. Orders are sent with correct updated documentation papers included with the board,only here we special reinforced Golden USB plug and Pin-headers in the bag. Beware of other shops claiming V3 or other ,make sure yours is a best available today,  always tested and flashed the the newest Betaflight firmware.For racing or freestyle we know you demand the ultimate level of precision and accuracy the Flip32 Omnibus FC will deliver. STM32 controls OSD chip over SPI in DMA mode, less CPU using, faster rate.

    • STM32 F405 MCU (Spi connected to Gyro)
    • MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
    • "Drag and Drop" OSD (configured over Betaflight UI)
    • D-shot Support
    • Target "OMNIBUS F4" to update the firmware
    • SBUS/PPM + DSMX Ports
    • 5v1.5a Clean Sbec /w On-Board Video Filter
    • Built-in Current Sensor voltage + rssi + buzzer as pins
    • Barometer
    • OSD Configation has been incl. in Betaflight GUI.
    • LIPO direct input (2-4S). 4s supported
    • 20x20mm  w/ M3 holes

    This  Flip32 Omnibus F4 Nano Flight controller with a packs a punch using the MPU6000 over SPI for the best possible flight performance on smaller crafts. Also on-board are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD, and smart Audio Support. Powerful F4 but with small 20x20 hole size with 3M sized holes can take direct 2S-4S power-in,  This FC  will also be capable of replacement for PDB allowing you for super tight build connecting the ESC to the FC. For 3.3Volt power please use the boot pin

    Learn More
  8. Regular Price: $23.99

    Special Price $19.99

  9. Regular Price:

    $23.00
    View Details
  10. Regular Price: $20.00

    Special Price $15.00

    View Details

    When size and weight matters the most. the Racing Edition is a 30x17mm board size is about half the size. This is a micro version of the Flip32.

    30mm x 17mm
    2 gram without headers
    STM32F103CBT6 32-bit Cortex M3 processor
    MPU6050 Accelerometer/Gyro
    Full PWM/PPM RC Input
    6 motor outputs for multi-rotors
    Batt/voltage monitoring
    Onboard USB plug 
    Three Status LEDS
     
    comes Cables for radio , and for buzzer and BATT ports 
    Learn More

Grid List

Set Descending Direction

1-10 of 13

Page:
  1. 1
  2. 2