All FC's are Tested and Shipped w/ NEWEST BetaFlight 3.3.1! Most orders shipping same day!  Departing from Florida, U.S.A.  

Flight Controllers

Grid List

Set Descending Direction

1-10 of 104

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Regular Price:

    $26.00
    View Details
  2. Regular Price:

    $97.95
  3. Regular Price:

    $23.99
  4. Regular Price: $69.99

    Special Price $67.99

  5. Regular Price: $44.99

    Special Price $38.99

    View Details

    Flip32 OMNIBUS F4 Pro Corner has all the feature one would expect from the Omnibus line but add in a Build In power distribution board. All of the Pads needed are on the TOP side, no needed to flip the board over for installs. ESC32 Telemetry pads are also on the corners to support ESC telemetry!   The Omnibus F4 Pro Corner flight controller uses the ICM20608 over SPI for the best possible flight performance. With onboard damping box, the ICM20608 runs perfect under 32k Gyro loop. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. Also onboard are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD.

    Omnibus F4 Pro Corner supports 3-6s LIPO direct input, build in Current Sensor and Power Filter too.

    All units flashed with stable BetaFlight 2.3.0. Take advantage of all the new features out of the box, Automatic Notch filter, turtle mode, Camera control, Increased motor output resolution, OSD improvements, and much , more

    The on Board PDB is tweaked by using 12-Layer PCB design. There is only 0.2-0.5 mohm internal resistance from input to each output pads

    • STM32 F405 MCU (Spi connected to Gyro)
    • ICM20608 (the 6 axis SPI Gyrometer + Accelerometer)
    • "Drag and Drop" OSD (configured over Betaflight UI)
    • D-shot Support
    • Build 12- layer level PDB
    • Able tune your pids via transmitter/Video via SmartAudio
    • SBUS/PPM + DSMX Ports
    • 5v1.5a Clean Sbec /w On-Board Video Filter
    • Built-in Current Sensor voltage + rssi + buzzer as pins
    • SmartAudio 
    • Barometer (SPI Baro)
    • OSD Configation has been incl. in Betaflight GUI.
    • LIPO direct input (2-6S).
    • 30x30mm mounting holes w/ M3 holes

    Flip32 OMNIBUS F4 Pro Corner is a  powerful F4 with a Switching power supply small 30x30  hole size with 3M sized holes can take direct 3S-4S power-in With Build in PDB. making the most compact stack possible . You can also attach A TBS Unify Pro HV or TBS Unify Pro HV Race Edition, or others to make changes to your VTX with SmartAudio through the OSD. (Band, Channel, power, PIT Mode)


    Beware of the black clone. the PCB is not the same quality, and by cause restarts or other issues, and the gyro line is very noisy. we gave them a lead by getting comparing the worst case real one from the 10 clones we order to check the quality.  They do not use the same amount of copper and the internal resistance is higher, and this matters. 

    Learn More
  6. Regular Price:

    $34.99
    View Details

    The Flip32 OMNIBUS F4 NANO LC is a good option if you do not need a Data flash Logger on board, and you power the camera via the FC. If not the cheaper Nano V2 will be the same results. If you need a Data flash the V2 is the same layout with a Memory chip. This flight controller takes away the black box, but add a small filter to the power line on the Camera connecor now in 20x20mm mounting hole size (3m holes).Target "OMNIBUS F4" to update the firmware. With F4 and Betaflight OSD. 2-4 cell battery supported. 4s is currently supported with WITH onboard BEC , just connect to the FC and it will power., but you can still have the current and Voltage readings on the OSD, and is supported. The Omnibus Flight controller line has proven itself to be one of the most reliable,speed, and feature packed boards out today. Taking the features and setting the standard by which all other flight controllers are measured.  Leading with way with features like a powerful F3/F4 processor, Betaflight OSD, current sensor, VBatt, 5v 1.5-3A BEC output, MicroSD Black Box, video output filter, and the ability to tune PIDs over video or transmitter, the list keep on growing. Now attempted been to be copied by others, that might not have all the knowledge / customized chips (OSD, 5v). RTFQuads  will always have the freshest & newest genuine OMNIBUS total flight controller line up.  A portion of the flight controller sales goes toward BetaFlights developers  to make sure the firmware keeps growing, and adding more features. Orders are sent with correct updated documentation papers included with the board,only here we special reinforced Golden USB plug and Pin-headers in the bag. Beware of other shops claiming V3 or other ,make sure yours is a best available today,  always tested and flashed the the newest Betaflight firmware.For racing or freestyle we know you demand the ultimate level of precision and accuracy the Flip32 Omnibus FC will deliver. STM32 controls OSD chip over SPI in DMA mode, less CPU using, faster rate.

    • STM32 F405 MCU (Spi connected to Gyro)
    • MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
    • "Drag and Drop" OSD (configured over Betaflight UI)
    • D-shot Support
    • Target "OMNIBUS F4" to update the firmware
    • SBUS/PPM + DSMX Ports
    • 5v1.5a Clean Sbec /w On-Board Video Filter
    • Built-in Current Sensor voltage + rssi + buzzer as pins
    • Barometer
    • OSD Configation has been incl. in Betaflight GUI.
    • LIPO direct input (2-4S). 4s supported
    • 20x20mm  w/ M3 holes

    This Flip32 Omnibus F4 Nano Flight controller with a packs a punch using the MPU6000 over SPI for the best possible flight performance on smaller crafts. Also on-board is a barometer and AB7456 OSD chip for the BetaFlight integrated OSD, Smart Audio Support, Camera Control, ESC32 telemetry, and more. Powerful F4 but with small 20x20 hole size with 3M sized holes can take direct 2S-4S power-in, 3.3 Volt power for spectrum users. The special feature of this Fc is a super Clean Power L/C filter to power the camera. This cuts out any extra noise in the picture for super clear video feed.

    (SBUS + SmartPort + SmartAudio + CamControl) Config:

    Code:
    # Betaflight / OMNIBUSF4SD (OBSD) 3.2.2 Nov 11 2017 / 00:39:14 (77782e602) MSP API: 1.36
    
    resource SERIAL_TX 11 A10
    
    feature SOFTSERIAL
    feature TELEMETRY
    feature LED_STRIP
    
    serial 0 32 115200 57600 0 115200
    serial 5 64 115200 57600 0 115200
    serial 30 2048 115200 57600 0 115200
    
    set serialrx_provider = SBUS

    ESC32 telemetry mod CONFIG: 

    Here is a config for the mod. Don't forget to select one of DSHOT for ESC/Motor protocol.

    Code:
    resource ADC_CURR 1 NONE
    feature ESC_SENSOR
    serial 2 1024 115200 57600 0 115200
    set current_meter = ESC
    set battery_meter = ESC


    Camera Control MOD: working with our Add on board here; try 
    inverted = off and on

    resource CAMERA_CONTROL C06
    set camera_control_ref_voltage = 295
    set camera_control_internal_resistance = 400
    set camera_control_inverted = off


    Learn More
  7. Regular Price:

    $19.99
    View Details

    The Flip32 F4 NANO now in 20x20mm mounting hole size (3m holes). This is a powerful flight controller in the 20x20 format with no OSD. 

    • STM32 F405 MCU (Spi connected to Gyro)
    • powerful ICM (the 6 axis SPI Gyrometer + Accelerometer)
    • D-shot Support
    • SBUS/PPM + DSMX Ports
    • LIPO direct input (2-4S). 4s supported
    • 20x20mm  w/ M3 holes

    This  Flip32 F4 Nano Flight controller with a packs a punch using the MPU6000 over SPI for the best possible flight performance on smaller crafts. Powerful F4 but with small 20x20 hole size with 3M sized holes can take direct 2S-4S power-in

    Learn More
  8. Regular Price:

    $54.99
    View Details
  9. Regular Price: $59.99

    Special Price $45.99

Grid List

Set Descending Direction

1-10 of 104

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5