All FC's are Tested and Shipped w/ NEWEST BetaFlight 3.5.0 (Aug.15th)! Departing from Florida, U.S.A.  

Flight Controllers

Grid List

Set Descending Direction

21-30 of 107

  1. Regular Price: $32.99

    Special Price $27.99

    View Details

    The OMNIBUS F4 V5 , with a barometer, and 6s support.  sports a super clean SBEC power supply when powered with direct lipo. The Flight controller will say cool, and is perfect for "Pod" style designs. The Omnibus Flight controller line has proven itself to be one of the most reliable, speed, and feature packed boards out today. Setting the standard by which all other flight controllers are done.  Leading with way with features like a powerful F3 processor, Betaflight OSD, current sensor, VBatt, 5v 1.5-3A BEC output, MicroSD Black Box, video output filter, and the ability to tune PIDs over video or transmitter, the list keep on growing. Now attempted been to be copied by others, that might not have all the knowledge / customized chips (OSD, 5v). RTFQuads  will always have the freshest & newest genuine OMNIBUS total flight controller line up.  A portion of the flight controller sales goes toward BetaFlights developers  to make sure the firmware keeps growing. Orders are sent with correct updated documentation papers included with the board, special reinforced Golden USB plug and Pin-headers in the bag. Beware of other shops claiming V3 or other ,make sure ours is a best available today,  always tested and flashed the the newest firmware.

    NOTE: S-bus is built in default selected. If you want to use PPM. you need to CUT the track, then bridge the PPM pad, even the Sbus pads do not look "bridged" with solder.but they are connected inside the board, no bridging is needed for a super clean look.  OMNIBUS F4 V3 header through-hole is connected to UART6, not UART1 like all others. DSMX receiver is UART1 port

    • STM32 F405 MCU (Spi connected to Gyro)
    • MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
    • "Drag and Drop" OSD (configured over Betaflight UI)
    • D-shot Support
    • Able tune your pids via transmitter/Video via SmartAudio
    • SBUS/PPM + DSMX Ports
    • 5v1.5a Clean Sbec /w On-Board Video Filter
    • Built-in Current Sensor voltage + rssi + buzzer as pins
    • SmartAudio 
    • Barometer (SPI Baro)
    • OSD Configation has been incl. in Betaflight GUI.
    • LIPO direct input (2-4S).
    • 30x30mm mounting holes w/ M3 holes

    This Flight controller is a  powerful F4 with a Switching power supply  small 30x30  hole size with 3M sized holes can take direct 3S-4S power-in. You can also attach A TBS Unify Pro HV or TBS Unify Pro HV Race Edition, or others to make changes to your VTX with SmartAudio through the OSD. (Band, Channel, power, PIT Mode)


    Setup SoftSer 11 for runcam control:

    resource Motor 5 none

    resource Motor 6 none

    resource serial_rx 11 A1

    resource serial_tx 11 A8


    Get Mag working on UART3/I²C2:

    resource Serial_TX 3 none

    resource Serial_RX 3 none

    resource i2c_scl 2 b10

    resource i2c_sda 2 b11


    OMNIBUS F4 V5.1 Flight Control

    Learn More
  2. Regular Price: $37.99

    Special Price $34.99

    View Details

    All Flight Controllers are  flashed and tested with the newest stable BetaFlight 3.2.1. Take advantage of all the new features, Automatic Notch filter, turtle mode, Camera control,DShot1200, Increased motor output resolution, OSD improvements, and much , more

    Now Shipping the Newest 5V! with easier PPM/S_sub selector , and improved internal layout  and more robust build in BEC to solve any problems with some camera/Tx combos. Only place to get the freshest & NEWEST Genuine OMNIBUS total Flight Controller line that each  portion of the sales goes to back to the BF project. The only place with correct updated documentation included  with the board, reinforced USB plug and Pin headers in the bag if needed, always tested and flashed the the newest firmware ! BEWARE of other shops claiming V3 when it is not, ,make sure your is a true V3 here. Others shops are buying clones  and selling as originals and do not understand.

    BEWARE OF THE CLONE-because of the popularly the direct copys have come. They are all cloning the Older V2 with a massive Current Club24A problem. We also give a portion of sales back to the community to keep improving the software.

         Now with SD card reader and Baro The Omnibus F4 Pro has the F4 processor has a Built-in Current / Voltage Sensor . Built-in OSD, video filtering, Baro, and LDO. Supports D-Shot out of the box with no Modification. Tuning could not be easier with the help of the black box SD card reader and tuning via transmitter in the OSD. It is now possible to connect your Smartaudio capable VTX . The Flip32 Omnibus flight controller uses the MPU6000 over SPI for the best possible flight performance. Along with the MPU6000 are a and an AB7456 OSD chip (an upgraded MAX7456) for the BetaFlight integrated OSD. You won't need a PDB with this build because there is a high performance 5v, 1.5a STMicrocontroller L78 voltage regulator, so you can plug the flight battery right into the flight controller.The  Flip32 Omnibus flight controller the first  F4 flight controller with a MAX7456 OSD chip directly connected to the flight controller, so it can be configured from the BetaFlight configurator.  The Omnibus F4 features the STM32F405 F4 processor, built-in BetaFlight OSD, video filtering, microsd blackbox, and BMP280 Barometer. MPU6000 Low noise Gyro, in most cases soft mounted is not necessary, and is more accurate when attached to the frame. If you do see any symptoms, we high recommend to soft mount the motors first. 

    The SmartAudio support has been included in BF3.1.0! (SmartAudio V2 VTX Control)-it is now possible to connect your Smartaudio capable VTX.  OMNIBUS F4 SD (aka OMNIBUS F4 V2) 2016-12-08 - Connect RSSI wire to RSSI input on J4. [BF] Working IR Transponder. This feature was included in the BF3.1.0 . [BF] Fully configurable software serial"

    INSTALL THE BETAFLIGHT CONFIGURATOR

    NEW OSD tab in Betaflight configurator lets you setup and configure OSD settings on the fly!

    Flip32 Omnibus was designed a 36mmx36mm (30.5mm mount holes) community version of his AIO boards. It’s called Flip32 OMNIBUS and it’s outstanding. The great thing is that the board is based on what the community really wanted and it allows a very clean build by providing pin holes for almost every connection. You can power it directly from your battery by using BAT/GND pins. The following list some of the components included:

    • STM32 F403 MCU (Spi connected to Gyro)
    • Buildin Current/Voltage sensor!
    • Firmware hex = OMNIBUSF4SD hex from dropdown. 
    • MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
    • Smartaudio capable VTX PID Programming 
    • D- Shot Supported (no Modification) 
    • OSD (configured over Betaflight UI)
    • SD CARD READER + And BARO ADDED in V2
    • SBUS/PPM + DSMX Ports
    • SmartAudio V2 via J10
    • current + voltage + rssi + buzzer as pins
    • 4x 3 pin holes for ESCs + 4x signal pin holes
    • IR pins for lap timing transponder

    All Flight controllers are flashed and tested with Betaflight 3.2.1. Make sure to add the Silicone Modified Conformal Coating addition apply after testing and soldering. Protects electronics from moisture, corrosion, thermal shock, and static discharges.

    Learn More
  3. Regular Price:

    $29.99
  4. Regular Price:

    $34.00

    All credits to sambas - It is powered by ARM® Cortex-M7® 32-bit microcontroller (STM32F745), working @ 216Mhz frequency. F1,F3 are working on 72Mhz and F4 is working on 168Mhz clock speed. So it is faster than F4 and has 8 hardware UARTs for any of your needs. Betaflight has a release target for this board – AnyFC, so you will be able to flash the newest firmware straight after the release.

    https://github.com/sambas/hw/tree/master/AnyFCF7

    https://www.rcgroups.com/forums/showthread.php?2847666-Next-generation-flight-controller-AnyFC-F7

    • STM32F745VGT6 216MHz
    • MPU6000 SPI
    • 8 uarts available + VCP
    • 10 pwm outputs + 6 inputs
    • external I2C &SPI (shared with U4/5)
    • support for CAN
    • SD card logging (SPI)
    • 3 AD channels, one with 10k/1k divider, two with 1k series resistor
    • 35x35mm Normal Fc size
    Learn More
  5. Regular Price: $27.99

    Special Price $24.99

    View Details

    Installed with BetaFlight 3.3.2. This firmware will enable all the features , Baro + Blackbox+ LED Strip.  The Flip32 OMNIBUS F4 NANO now in 20x20mm mounting hole size (3m holes). Blackbox chip installed. The only place with a Data flash chip option installed on the board, and a free cable.  With F4 and Betaflight OSD. 2-4 cell battery supported. 4s is currently supported with onboard BEC , just connect to the FC and it will power., but you can still have the current and Voltage readings on the OSD, and is supported. The Omnibus Flight controller line has proven itself to be one of the most reliable,speed, and feature packed boards out today. Taking the features and setting the standard by which all other flight controllers are measured.  Leading with way with features like a powerful F3/F4 processor, Betaflight OSD, current sensor, VBatt, 5v 1.5-3A BEC output, MicroSD Black Box, video output filter, and the ability to tune PIDs over video or transmitter, the list keep on growing. Now attempted been to be copied by others, that might not have all the knowledge / customized chips (OSD, 5v). RTFQuads  will always have the freshest & newest genuine OMNIBUS total flight controller line up.  A portion of the flight controller sales goes toward BetaFlights developers  to make sure the firmware keeps growing, and adding more features. Orders are sent with correct updated documentation papers included with the board,only here we special reinforced Golden USB plug and Pin-headers in the bag. Beware of other shops claiming V3 or other ,make sure yours is a best available today,  always tested and flashed the the newest Betaflight firmware.For racing or freestyle we know you demand the ultimate level of precision and accuracy the Flip32 Omnibus FC will deliver. STM32 controls OSD chip over SPI in DMA mode, less CPU using, faster rate.

    • STM32 F405 MCU (Spi connected to Gyro)
    • MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
    • "Drag and Drop" OSD (configured over Betaflight UI)
    • D-shot Support
    • Target "OMNIBUS F4SD" to update the firmware
    • SBUS/PPM + DSMX Ports
    • Blackbox data flash chip
    • 5v1.5a Clean Sbec /w On-Board Video Filter
    • Built-in Current Sensor voltage + rssi + buzzer as pins
    • Barometer
    • OSD Configation has been incl. in Betaflight GUI.
    • LIPO direct input (2-4S). 4s supported
    • 20x20mm  w/ M3 holes

    This Flip32 Omnibus F4 Nano Flight controller with a packs a punch using the MPU6000 over SPI for the best possible flight performance on smaller crafts. Also on-board is a barometer and AB7456 OSD chip for the BetaFlight integrated OSD, Smart Audio Support, Camera Control, ESC32 telemetry, and more. Powerful F4 but with small 20x20 hole size with 3M sized holes can take direct 2S-4S power-in, 3.3 Volt power for spectrum users. The special feature of this Fc is it has a Black Box logging chip on board. This will allow you to log some flying and check them out on the black box viewer to see your motor graph and adjust your filters for a super crisp tune, or trouble shoot a problem.

    (SBUS + SmartPort + SmartAudio + CamControl) Config:

    Code:
    # Betaflight / OMNIBUSF4SD (OBSD) 3.2.2 Nov 11 2017 / 00:39:14 (77782e602) MSP API: 1.36
    
    resource SERIAL_TX 11 A10
    
    feature SOFTSERIAL
    feature TELEMETRY
    feature LED_STRIP
    
    serial 0 32 115200 57600 0 115200
    serial 5 64 115200 57600 0 115200
    serial 30 2048 115200 57600 0 115200
    
    set serialrx_provider = SBUS

    ESC32 telemetry mod CONFIG: 

    Here is a config for the mod. Don't forget to select one of DSHOT for ESC/Motor protocol.

    Code:
    resource ADC_CURR 1 NONE
    feature ESC_SENSOR
    serial 2 1024 115200 57600 0 115200
    set current_meter = ESC
    set battery_meter = ESC


    Camera Control MOD: working with our Add on board here; try 
    inverted = off and on

    resource CAMERA_CONTROL C06
    set camera_control_ref_voltage = 295
    set camera_control_internal_resistance = 400
    set camera_control_inverted = off
    Learn More
  6. Regular Price: $27.99

    Special Price $25.99

    View Details

    All units are tested and flashed with stable BetaFlight 2.3.4 . Supports 4s Battery input.  Take advantage of all the new features, Automatic Notch filter, turtle mode, Camera control,SmartAudio, Increased motor output resolution, OSD improvements, and much , more

    The Flip32 OMNIBUS F3 NANO in 20x20mm mounting hole size (3m holes). Target "OMNIBUS" to update the firmware. Build-in power distribution board PDB with current sensor on board. 2-4s cell battery , current and Voltage readings on the OSD. The Omnibus Flight controller line has proven itself to be one of the most reliable,speed, and feature packed boards out today. Taking the features and setting the standard by which all other flight controllers are measured.  Leading with way with features like a powerful F3/F4 processor, Betaflight OSD, current sensor, VBatt, 5v 1.5-3A BEC output, MicroSD Black Box, video output filter, and the ability to tune PIDs over video or transmitter, the list keep on growing. Now attempted been to be copied by others, that might not have all the knowledge / customized chips (OSD, 5v). RTFQuads  will always have the freshest & newest genuine OMNIBUS total flight controller line up.  A portion of the flight controller sales goes toward BetaFlights developers  to make sure the firmware keeps growing, and adding more features. Orders are sent with correct updated documentation papers included with the board,only here we special reinforced Golden USB plug and Pin-headers in the bag. Beware of other shops claiming V3 or other ,make sure yours is a best available today,  always tested and flashed the the newest Betaflight firmware.For racing or freestyle we know you demand the ultimate level of precision and accuracy the Flip32 Omnibus FC will deliver. STM32 controls OSD chip over SPI in DMA mode, less CPU using, faster rate.

    UART3 is used for DSM Sat AND SBUS

    Features:

    • STM32 F303 MCU (Spi connected to Gyro)
    • MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
    • "Drag and Drop" OSD (configured over Betaflight UI)
    • D-shot Support
    • Target "OMNIBUS" to update the firmware
    • SBUS/PPM + DSMX Ports
    • 5v1.5a Clean Sbec /w On-Board Video Filter
    • Built-in Current Sensor voltage + rssi + buzzer as pins
    • Built in PBD ( 60 AMPS sensing) 
    • Barometer
    • OSD Configation has been incl. in Betaflight GUI.
    • LIPO direct input (2-4s)
    • 20x20mm  w/ M3 holes
    • Note: This is the newest V3. the board color can be Black or Blue.

    This  Flip32 Omnibus F3 Nano Flight controller with a packs a punch using the MPU6000 over SPI for the best possible flight performance on smaller crafts. Also on-board are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD, and smart Audio Support. Powerful F3 but with small 20x20 hole size with 3M sized holes can take direct 2S-4S power-in, the on-board BEC will work for 2s-4s will support the Current sensors and voltage readings still supported over OSD, but will not have a BEC power on 4s.  This FC  will also be capable of replacement for PDB allowing you for super tight build connecting the ESC to the FC.

    Learn More
  7. Regular Price:

    $17.00 As low as: $15.00
    View Details

    *All unites now flashed with BetaFlight 3.1.7 and have support for D-shot ready to select from the Dropdown! D-shot Ready! 

    NOW SHIPPING V2!  S-Bus and PPM on individual pins to make use of more Uarts , Improved BEC circuity,added copper, easier Inav support, and more.... 

    Tons of features in one board with a wounder full layout. Flip F4 ; Flip32 F4 With the low noise Gyro, optimal gyro placement recommended , and not an overly super inventive gyro that will require chasing down the PID tune, Hard mounting in most cases will not hurt performance. A small portions of sales go back to the beta flight program to keep on pushing more features forward. 

    • -Uses the cc3d revolution Target vanilla default.  -updated instantaneously with new releases.
    • Stable SPI MPU-6000 Gyro 
    • D- Shot support and Flashed with D-ready firmware 
    • All through hole pin header Design  -no Sh connectors 
    • direct Lipo input :1.5A  Built-in onboard regulator - NO BEC needed. connect direct to a Lipo to power the board and Rx.
    • RaceFlight or Betaflight support on an STM32 F3 with a SPI based MPU6000 gyro - low noise gyro will not force one to soft-mount the fc
    • Boot - DFU button . ready to be Pressed 
    • Blackbox support - Max 16mb for data logging
    • SBUS/PPM input (Pinheaders) . 6PWM output (Pinheaders)
    • Spektrum satellite port for direct connection -  setup radio via USB power, woot woot!
    • STM32 F405 MCU
    • LED strip Port
    • Buzzer Port  (v2 buzzer port. working great in BF)
    • Flashed tested and Ready to Fly after setup
    • Only 36x36mm, mount holes 30.5x30.5mm
    • UART1 has three input: 1. DSM2 socket, it is no inverter,  2.pinheaders called UART TX RX, it is no inverter 3. Pinheaders called SBUS, it has inverter

    Works Perfect with RACEFLIGHT - PRE LOADED WITH RACEFIGHT. 

    Download firmware here :  http://raceflight.net/beta/REVO_BB330_FULL.bin

    Newest Latest RaceFlight Configurator ( do not use one from chome web store, it is out of date  : http://raceflight.net/rfc/cfgrf.crx

    *here Boards are shipped BetaFlight with buzzer fixed, Buzzer is working out of the box from default port*

     *RaceFlight please connect Buzzer to labeled "RSSI" port. These port are swapped in the firmware, but are working . Buzzer should be connected to Rssi Port, no code changed need, the printing on the board from the RF and BF are not the same. 

    RaceFlight has the standard modes, Arm, Angle, Horizon, Beeper, and Failsafe.  There are other modes though that really help drive performance. Some modes have sweet names like Skitzo and BrainDrain (yes these modes are named after the pilots). There are also modes that are named for what they are. Below is a full list of modes minus the standards modes already mentioned.

    Pro Smooth modes, BrainDrain, Skitzo, Landing, Delete Flash, LED On, LED Change Program, LED Change Color, BlackBox

    some of the modes are self explanatory, like Delete Flash, BlackBox, Landing, etc. We’re going to focus on the 3 modes that help drive performance; Pro Smooth mode, BrainDrain mode, and Skitzo mode.

    Skitzo Mode – Skitzo mode is unique. It essentially increases the resolution of your stick inputs into the flight controller. With Skitzo mode enabled, this resolution increase is supposed to be unlimited. This translates to smoother flight in air and allows you to make finer in flight adjustments. Leave it on all the time, it feels amazing!

    BrainDrain Mode – BrainDrain mode gives you a sharper stick feel. This isn’t the same as resolutions though. This translates more towards your rates responsiveness. It’s really good for racing when you need that super sharp stick feel on the sharp 180s for example. Having this enabled is great, but it may require some additional tuning. This is because with the sharpness increase, prop-wash can be more noticeable.

    Pro Smooth Mode – Pro smooth mode smooths your transitions. It’s most useful when you’re trying to get that absolutely stunning video of your freestyle flight. When you make stick transitions, pro smooth literally smooths them out so they’re not as jerky. You can really notice it when watching the HD video as it just makes things look smooth. You can use this in case you’re not as smooth on the sticks as Skitzo.

    RaceFlight also has some cool built in witchcraftfeatures that you can take advantage of and tweak! One such feature is called “witchcraft.” Witchcraft smooths Kd over time. Kd is Derivative in your PID controller. This helps take care of bad data and smooths the data over the course of tiny milliseconds. It comes set to a default of 16 right now, but 32 is a good number to get you started It’s something you can play and tweak to your liking.

     Raceflight is a latest flight controller firmware. By taking advantage of the processing power of F4 flight controllers, it’s able to run at 8kHz and brings the looptime down to 125 (uS). MultiShot ESC protocol which is 10 times faster than Oneshot125, 80 times faster than standard PWM signal

    Works Perfect with RACEFLIGHT - PRE LOADED WITH RACEFIGHT Or BetaFlight 3.0!

    Uses the same target and feature of the CC3D OpenPilot revolution but with more feature.

    ~ The OpenPilot Revolution board, also called 'Revo', is a new breed of Autopilot using the STM32F4 series, 210MIPS ARM Micro-controller. It contains a hardware floating point unit (FPU)which is a huge advancement for hobby-class autopilots. OpenPilot has been 32bit since day one, and the FPU is another step up the performance ladder. The FPU allows precise, low-latency processing of real-life measurements using advanced attitude estimation algorithms.

    The Revolution is a flight control computer with autopilot, intended for multirotors, helicopters and fixed wings. It is a 6DOF with gyroscope/accelerometer only,  no magnetometer and  no pressure sensors and no radio link.

    -Flexi-IO Port: JST-SH 10-pin. The receiver port can act as an input or output port depending on the configuration which is set in the Hardware Settings. Configuring the receiver port as an output port allows the user to assign more output channels then the 6 standard servo outputs.
    -MainPort: JST-SH 4-pin. This is a serial USART whose baud rate can be adjusted through the GCS. Optionally, Futaba S.Bus receiver, Spektrum/JR satellite receiver or GPS can be mapped to the MainPort. Default configuration is Telemetry for connecting an RF modem.
    -FlexiPort: JST-SH 4-pin. The function of this port also depends on the configuration and can be configured for I2C or Serial. The default configuration doesn't use this port, but it can be used for Telemetry, GPS, Spektrum satellite receivers (all working), and other I2C peripherals (under development).
    -RF Socket: Antenna connection socket for on-board OPLink modem.
    -Pwr Sen/Sonar Port: JST-SH 4-pin. This port can be configured to accommodate an Autopilot current sensor and a low cost Sonar sensor such as the HC-SR04. It can also be used as a general purpose input/output port or as a one or two channel analog input port.

    Learn More
  8. Regular Price:

    $17.99
    View Details
  9. Regular Price:

    $18.99
    View Details
  10. Regular Price:

    $19.99
    View Details

Grid List

Set Descending Direction

21-30 of 107