All orders Departing from Florida, U.S.A.  

Flip 32+ F3 AIO-ACRO

Flip 32+ F3 AIO-ACRO

Regular Price: $39.99

Special Price $35.00

TUNE YOUR PIDs VIA OSD!

Per-load with BETAFLIGHT 3.0.1  and  scarab osd 1.6.4.0! Do not bang your head on the desk trying to figure out all the firmware configuration settings. We have spent  a lot of time, so this FC & OSD is the most Ready to Fly It can be, ONLY FROM RTFQuads, we have built and know these Flight Controllers  more then anyone else, just load up the GUI and move the OSD objects around to your liking ! Less time on the bench more time in the Air! 

get the OSD GUI HERE: https://github.com/ShikOfTheRa/scarab-osd/archive/v1.6.4.0.zip

Make a super Clean build with less parts counts and super clean look with the 4in1 ESC. Upgraded AIO FC, based on F302 MCU, incl. F3 FC / OSD/ USB / Blackbox / Current Sensor / BEC / Compass / Baro in 35x35mm Board. Compare to F1 MCU, it supports more UART, runs faster and has Blackbox. The Connection between FC-OSD-USB will be managed automaticlly, NO DIP SWITCH needed



  • STM32 F303 MCU, Runs Cleanflight firmware 

  • no Barometer &Compasss 

  • MPU6050 

  • 8PWM output as PLUG,4x PWM output as Solder pads

  • 35x35mm, mount holes 30x30mm 

  • 128Mb Flash(16M Byte) 

  • 5v 2A BEC (up to 4s) 

  • Current and voltage sensor incl. 

  • Smart button instead of DIP switch


Smart connection When powered by LIPO(no USB cable attached) When USB cable plug in, the USB will connect to FC automaticlly, you can change the connect to "USBOSD" by press Smart Button for 1S then release when USB cable pluged in.(Then LED shows OFF) Smart Button 's LED is ON Smart Button 's LED is ON Smart Button 's LED is OFF FC USB USB OSD FC OSD press Smart Button for 1S then release press Smart Button for 1S th

Regular Price: $39.99

Special Price $35.00

 
Description

Details

  • Per-load with BETAFLIGHT 3.0.1  and  scarab osd 1.6.4.0! Do not bang your head on the desk trying to figure out all the firmware configuration settings. We have spent  a lot of time, so this FC & OSD is the most Ready to Fly It can be, ONLY FROM RTFQuads, we have built and know these Flight Controllers  more then anyone else, just load up the GUI and move the OSD objects around to your liking ! Less time on the bench more time in the Air! 

    get the OSD GUI HERE: https://github.com/ShikOfTheRa/scarab-osd/archive/v1.6.4.0.zip

  • STM32 F303 MCU, Runs Cleanflight firmware 
  • MPU6050 
  • 8PWM output as PLUG,4x PWM output as Solder pads
  • 35x35mm, mount holes 30x30mm 
  • 128Mb Flash(16M Byte) 
  • 5v 2A BEC (up to 4s) 
  • Current and voltage sensor incl. 
  • Smart button instead of DIP switch

Smart connection When powered by LIPO(no USB cable attached) When USB cable plug in, the USB will connect to FC automaticlly, you can change the connect to "USBOSD" by press Smart Button for 1S then release when USB cable pluged in.(Then LED shows OFF) Smart Button 's LED is ON Smart Button 's LED is ON Smart Button 's LED is OFF FC USB USB OSD FC OSD press Smart Button for 1S then release press Smart Button for 1S th

Reviews