All orders Departing from Florida, U.S.A.  

Frame Parts

Grid List

Set Descending Direction

1-10 of 53

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Regular Price:

    $0.99

    The new XT60+ is here!  With "snap on" insulating end caps to provide the best polarity insulation for your soldered connections, these are sure to become the most popular battery connector for hobbyists.

    The basis of the original robust XT60 design has been retained and the connector is compatible with the original XT60, but now thanks to the snap on end cap there is no need to use heatshrink and the ridged edges on the end cap provide extra grip when pulling the male and female connectors apart.

    Initial assembly requires a little force to clamp the end cap in place but please note that the end cap is hard to disassemble once it has been installed.  Should you wish to remove the end cap  you will have to "break it" with both hands to get it to release.  

    Specs:

    Material: Gold-plated copper
    External Material: Nylon/PA
    Max. RC/MC: 60A/100A
    Weight: 7.72g
    Pulling Force/600: 3kg
    Temperature Resistance: -20°C~120°C
    Recommended Cable Spec.: 12AWG
    Recommended Soldering Spec.: 480°C/4S

    Includes:
    1 sets of male and female plugs

    Learn More
  2. Regular Price:

    $6.99

    Features:

    2oz copper & 4-layers PCB.
    Low Ripple current
    ESC & Battery solder tabs in pairs.
    Solder Bridges of various voltage for Camera & VTX.
    DC/DC synchronous buck regulator, Efficiency is up to 95%.
    5V & 12V Output LED indicators & Short circuit tolerant.


    Specification:
    Working Voltage: 3~6S LiPo
    Output Voltage: 5V&12V
    Output Current: 2A
    ESC outputs: 4
    Current output:4*20A
    Size: 36*36mm
    Weight: 5.5g
    Mounting: 30.5mm / Φ3mm

    Learn More
  3. Regular Price:

    $49.99
    View Details

    Specifications:
    Width:180mm
    Material: Carbon Fiber
    Up board: 2mm
    Lower board: 4mm
    Height: 52mm
    Weight: 175g(with spare accessories)
    Motor mount bolt holes: 12/16/19mm
    Note: The price not include camera

     

    Recommend (not included):
    Propeller: 4 inch (About 102mm)
    Motor: 2204/2206
    ESC: 12-20A
    Camera: DIATONE 600 TVL Mini Camera
    Flight controller: Diatone Naze32 Rev6(B)6DF
    Battery: 3S 1300 mAh / 4S 1300mAh

     


    Package included:
    Intergration PDB ×1
    Frame Kit ×1
    2206 Motor Protect Landing Gear ×4
    Cables × 1 sets
    Minicamera mount ×1

     

     

     

    Learn More
  4. Regular Price:

    $39.99
    View Details

    Specifications:
    Width:150mm
    Material: Carbon Fiber
    Up board: 1.5mm
    Lower board: 4mm
    Height: 52mm
    Weight:124g(with spare accessories)
    Motor mount bolt holes: 9/12mm
    Note: not include camera

     

    Recommend (not included):
    Propeller: 3 inch (About 76mm)
    Motor: 1306 3100KV
    ESC: 6-8A
    Flight controller: Diatone Naze32 Rev6(B)6DF
    Camera: DIATONE 600 TVL Mini Camera
    Battery: 3S 1300 mAh / 4S 1300mAh

     

    Package included:
    Intergration PDB ×1
    Frame Kit ×1
    1306 Motor Protect Landing Gear ×4
    Cables × 1 sets
    Minicamera mount ×1

    Learn More
  5. Regular Price:

    $59.99
    View Details

    Specifications:
    Width:215mm
    Material: Carbon Fiber
    Up board: 2mm
    Lower board: 4mm
    Height: 52mm
    Weight: 191(with spare accessories)
    Motor mount bolt holes: 12/16/19mm
    Note: The price not include camera


    Recommend (not included):
    Propeller: 5 inch (About 127mm)
    Motor: 2204/2206
    ESC: 12-20A
    Camera: DIATONE 600 TVL Mini Camera
    Flight controller: Diatone Naze32 Rev6(B)6DF
    Battery: 3S 1300mAh / 4S 1300mAh


    Package included:
    Intergration PDB ×1
    Frame Kit ×1
    2206 Motor Protect Landing Gear ×4
    Cables × 1 sets
    Minicamera mount ×1

    Learn More
  6. Regular Price:

    $1.75

    35x20mm.

    Extra coper to support 75A Current

    perfect for Micro sized quads

    Learn More
  7. Regular Price:

    $1.99

    Description:
    Confirm the Motor Protect Landing Gear is suitable for any frame , please refer to the size in the picture below.


    Features:
    Reinforced Nylon composite materials

    Specifications:
    Installation diameter: 23mm
    Height: 15mm
    Weight: 2.7g
    Motor mount boit holes: 12-16mm(M2)


    Package included:
    Landing Gear *2
    M2*8 Screw *9

    Learn More
  8. Regular Price:

    $17.00

    This feature packed board has power distribution for your ESC in a reasonable layout .Packed also with a LC,and 5V 12V bec output,power for OSD,camera,LC filter to avoid the noise.

    Includes a full Minim OSD - you can use the popular MWOSD which in the latest beta includes support for betaflight or any of the other popular variants of the minim osf firmware.This also includes most of the features of the Power pro  including the LC filter, 12 & 5v bec.

    Can be run stand alone without a flight controller connection to provide battery voltage and powered up time - or combine with a gps for a stand alone option in a fixed wing.This has been pre bridged with the most popular voltage out options for camera and vtx but if you do need 5v rather than 12v to your camera or vtx it is easy adjusted.  Also like the PBD if you are running 3s you have the option of feeding the 12v output direct from the battery or through the regulator - most other boards don't give you that option.Easy solder pads for your esc's with the option to feed the esc wires up from underneath for a clean build.35x35mm with 30.5mm mounting holes so it is easily stack-able with your existing mini quad flight controller

    Learn More
  9. Regular Price:

    $8.00

    Super thick and strong. 

    Has a switch to change LED. This can easly me removed for a super low profile 

    +Fits ZMR Bolt pattern
    +1806 & 22XX Motor Mounting
    +Processor: SiLabs F330
    +Dampend light Support
    +OneShot125 compatible
    +3.75mm Thick & Strong
    +16 Amps (2-4s)

    Learn More
  10. Regular Price:

    $10.99

    Description:

    Resolution: 700TVL
    Camera Dimensions: 32mm * 32mm * 29mm
    Illumination: 0.1LUX(F1.2)
    Format:PAL / NTSC
    Power supply range: 10-12V 100mA (2S-3S Lipo)
    Audio Lens: Wide-angle 2.1mm (About 120 degree)
    Image sensor:1/3 CMOS image sensor
    Sensitive area: 3.5964mm x 2.7084mm
    PAL ( H X V ):512X 582 NTSC ( H X V ):542 X 492
    Electronic Shutter: PAL= 1/50 - 1/100,000 S, NTSCL= 1/60 - 1/120,000S
    SNR ≥48dB (AGC OFF)
    Minimum illumination : 0.1 Lux / F1.2
    Composite video signal :1.0Vp-p 75Ω
    Standard Lens :2.1 mm
    Specifications PCB: 32mm*32mm
    Operating temperature :-10 ℃ ~ 60 ℃ RH95% Max


    Package included:
    1 x 700TVL Wide Angle Lens Camera

    1x Camera Mount (as shown in picture)

    Learn More

Grid List

Set Descending Direction

1-10 of 53

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5