All FC's are Tested and Shipped w/ BetaFlight 3.2.4.   Departing from Florida, U.S.A.  

12 Amp

Grid List

Set Descending Direction

21-30 of 36

  1. Regular Price:

    $7.50
    View Details
    Flashed with newest BlHeli 14.0.0.2 firmware installed and tested!
    (the newest firmware is compatible running conjugation with all 13.x.x firmware)
    RTF Hugs 12A ESCs will have all the groupies hugging you when you whip out the BL-Heli active braking version. They are made for Racing MultiCopters - specifically to run at 3S. They also feature ultra light weight construction with excellent thermal properties for a ESC - the MOSFETS are specifically selected to run with the least amount of heat production and highest efficiency. For Cleanflight ,Baseflight, Tau Labs, MultiWii, any flight code which is OneShot enabled - these ESCs are OneShot auto-detect ready.   Download software here

    The RTF 12Amp ESC BL-Heli ships out pre-programmed and optimized for best performance - pre-configured - OneShot is included/ready

    Enable Racing Mode! (Dampened Light Supported)

    Enable racing mode to change over 10 Settings for maximum performance: : PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance!  Pair with a Flip32 for automatic detection of all the advantages of Oneshot123

    The main advantages of BL-Heli software is the use Active free wheel and active braking (PWM Damping) Dampened Light - 13.1 is OneShot ready for Flip32 - this actively slows the prop/motor down on one side of your Quad, while speeding the prop on the other - without "active-braking" the prop has to slow by inertia and drag alone - this DAMPING Light mode puts the brakes on - the Racing Quad handles better - but you must also increase "P" slowly in 0.1 increments to see the full benefits. Boot-loader enabled! This means all the settings can be changed over the servo cable with a simple pro mini+ftdi combo

    These ESC's have the SimonK Bootloader enabled so they can easily be flashed using the USB Linker/afro linker/Nano linker tools.



    Learn More
  2. Regular Price:

    $9.00
    View Details
    RTF Hug+ VH 20A ESCs brings the reliability and dependability you have come to expect from the hugsESCs series but with more power! In a light package, featuring damped light and Oneshot capability.  Many months in testing we wanted to bring something that will keep hugging you for more when you push your quad to the limits., We tested many Mosfets and picked the best ones for active braking properties . The new Hug+ HV are the ultimate ESC for miniquad racing and freestyle racing, now 4s supported.  They are made for Racing MultiCopters - specifically to run at 4S. They also feature ultra light weight construction with excellent thermal properties for a ESC - the MOSFETS are specifically selected to run with the least amount of heat production and highest efficiency. For Cleanflight ,Baseflight, Tau Labs, MultiWii, any flight code which is OneShot enabled - these ESCs are OneShot auto-detect ready.

    The RTF 20Amp ESC Simonk ships out pre-programmed and optimized for best performance - pre-configured - AutoShot is included/ready autodected. ESCs are shipped ready to go - flashed with BLHeli 14 and damped light enabled (option). I highly recommend picking up USB programmer. These are opto, so do not forget a RTF 1V-17V ADJUSTABLE VOLTAGE REGULATOR

    We also have units pre-soldered with all the wires soldered. PWM, Power, and motor wires solder and ready to go. 

    These ESC's have the SimonK Bootloader enabled so they can easily be flashed using the USB Linker/afro linker/Nano linker tools.

    • Oneshot capable (automatic detection) 
    • damped light enabled, (as option)
    •  fast high side switching
    • no big radial electrolytic capacitor
    • 20A continuous 30 A Bust 
    • NO BEC. LESS EMI, NO HEAT
    Learn More
  3. Regular Price:

    $9.00
    View Details
    RTF Hug+ VH 20A ESCs brings the reliability and dependability you have come to expect from the hugsESCs series but with more power! In a light package, featuring damped light and Oneshot capability.  Many months in testing we wanted to bring something that will keep hugging you for more when you push your quad to the limits., We tested many Mosfets and picked the best ones for active braking properties . The new Hug+ HV are the ultimate ESC for miniquad racing and freestyle racing, now 4s supported.  They are made for Racing MultiCopters - specifically to run at 4S. They also feature ultra light weight construction with excellent thermal properties for a ESC - the MOSFETS are specifically selected to run with the least amount of heat production and highest efficiency. For Cleanflight ,Baseflight, Tau Labs, MultiWii, any flight code which is OneShot enabled - these ESCs are OneShot auto-detect ready. Download software here

    The RTF 20Amp ESC BL-Heli ships out pre-programmed and optimized for best performance - pre-configured - OneShot is included/ready autodected. ESCs are shipped ready to go - flashed with BLHeli 14 and damped light enabled (option). I highly recommend picking up USB programmer to change any settings. These are opto, so do not forget a RTF 1V-17V ADJUSTABLE VOLTAGE REGULATOR

    Enable Racing Mode! (Dampened Light Supported)

    Enable racing mode to change over 10 Settings for maximum performance: : PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance!  Pair with a Flip32 for automatic detection of all the advantages of Oneshot123

    The main advantages of BL-Heli software is the use Active free wheel and active braking (PWM Damping) Dampened Light - 14.0.0.2 is OneShot ready for Flip32 - this actively slows the prop/motor down on one side of your Quad, while speeding the prop on the other - without "active-braking" the prop has to slow by inertia and drag alone - this DAMPING Light mode puts the brakes on - the Racing Quad handles better - but you must also increase "P" slowly in 0.1 increments to see the full benefits. Boot-loader enabled! This means all the settings can be changed over the servo cable with a simple pro mini+ftdi combo

    These ESC's have the SimonK Bootloader enabled so they can easily be flashed using the USB Linker/afro linker/Nano linker tools.

    • Oneshot capable (automatic detection) 
    • damped light enabled, (as option)
    •  fast high side switching
    • no big radial electrolytic capacitor
    • 20A continuous 30 A Bust 
    • NO BEC. LESS EMI, NO HEAT

    We also have units pre-soldered with all the wires soldered. PWM, Power, and motor wires solder and ready to go. 

    Learn More
  4. Regular Price:

    $25.00
    View Details

    RTF Mini "4-in-1" 12-Amp 35x35 

    Users will need to install cap and wires. 

     

    Please note: This is for more advanced users. Good soldering is a must.

    Watch your spacer size, the clearance is minimal. 3mm spacers work best, but you still need to file down the thick edges.

    5-15-13 simonk firmware installed. 

    Learn More
  5. Regular Price:

    $25.00
    View Details

    RTF Mini "4-in-1" 12-Amp 35x35 HIGH VOLTAGE up to 4s

    RTF  "4-in1" 12 amp ESC with customized SimonK firmware including OneShot auto-detect is the perfect ESC to use on any MultiCopters. This ESC is small in size (35mmX35mmx6mm) and big on power, supporting 22A on 4s , testing up to 250watts per channel . The ESC comes pre-loaded with the newest simonk  firmware, which is compatible with new features like "OneShot" (no soldering required, it will auto-detect if OneShot is enabled), Comp PWM (similar to KISS braking feature), compatible withanymost all  motors up to 4 cell.

    The RTF 12 amp AutoShot 4-in1 ESC has been tested and are compatible with all RTF motors , 2S-4S, both 5" and 6" props without sync loss issues or cogging.

    Users will need to install and wires. no extra cap needed

    Please note: This is for more advanced users. Good soldering is a must.

    Watch your spacer size, the clearance is minimal. 3mm spacers work best, but you still need to file down the thick edges.

     

    Learn More
  6. Regular Price:

    $25.00
    View Details

    NOW WITH BLHeli Boot-loader! Update settings easy with 1 wire interface!

    Flashed with newest BlHeli 14.4 firmware installed and tested! RTF 12A  BL-Heli '4-in-1" ESC are made for any MultiCopter - specifically to run at 2s,3S or 4S they also feature ultra light weight  gram construction with excellent thermal properties. - the MOSFETS are specifically selected to run BL-Heli WITH active damping code with the least amount of heat production and highest efficiency. This is opposite to the majority of ESCs retrofitted with SimonK or BL-Heli which actually run much hotter and are less efficient - We have selected very carefully the BEST mosfets to run on BLHEli code - These ESC are perfect for 3S or 4S pro-spec Quads. These ESC have OneShot enabled auto-detected code installed. - Damped Light Mode and Oneshot capable.

    RTF Mini "4-in-1" 12-Amp 35x35 HIGH VOLTAGE up to 4s- Damped Light Mode and Oneshot capable.

    Users will need to install and wires. no extra cap needed

    Please note: This is for more advanced users. Good soldering is a must. Watch to make sure the solder does not overflow to the mosfets.

    Watch your spacer size, the clearance is minimal. 3mm spacers work best, but you may still need to file down the thick edges.

     

    Learn More
  7. Regular Price:

    $8.00
    View Details
    Flashed with newest BlHeli 13.2.0.2 firmware installed and tested!
    (the newest firmware is compatible running conjugation with all 13.x.x firmware)
    RTF B-12A ESC Run cool as ice when your ducking trees with the BL-Heli active braking version, are made for Racing MultiCopters - specifically to run at 2-4S. They also feature ultra light weight construction with excellent thermal properties for a ESC - the MOSFETS are specifically selected to run with the least amount of heat production and highest efficiency. For Cleanflight ,Baseflight, Tau Labs, MWii, any flight code which is OneShot enabled - these ESCs are OneShot auto-detect ready.
    The RTF 12Amp ESC BL-Heli ships out pre-programmed and optimized for best performance -pre-configured- OneShot is included/Ready
     
    Enable Racing Mode! (Dampened Light Supported)
    Enable racing mode to change over 10 Settings for maximum performance: PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance!  Pair with a Flip32 for automatic detection of all the advantages of Oneshot123
     
    The main advantages of BL-Heli software is the use Active free wheel and active braking (PWM Damping) Dampened Light - 13.1 is OneShot ready for Flip32 - this actively slows the prop/motor down on one side of your Quad, while speeding the prop on the other - without "active-braking" the prop has to slow by inertia and drag alone - this DAMPING Light mode puts the brakes on! - the Racing Quad handles better - but you must also increase "P" slowly in 0.1 increments to see the full benefits. Boot-loader enabled! This means all the settings can be changed over the servo cable with a simple pro mini+ftdi combo
    Learn More
  8. Regular Price:

    $8.00
    12 Amp RapidESC BLHeli multi can also be flashed. For most users we find SimonK plays best with almost all flight controllers, for an amazing flight. If you want to play around with BLheli, try to changing Standard config to:1. timing set to med-hi, 2. demag compensation set to off, may require more changes for your battery/motor setup. For more info on BLHeli go here Learn More
  9. Regular Price:

    $8.00
    View Details
    Flashed with newest BlHeli 13.2.0.2 firmware installed and tested!
    (the newest firmware is compatible running conjugation with all 13.x.x firmware)
    OPTO - less EMI in the multicopter frame and less heat - you get a lot of electrical noise from 4 to 8 high amp uBECs in a radial pattern at the centre of your multicopter
    These ESCs will give your multi rotor quicker reflexes, less drift, and smoother flights. These are so fast, compared to standard ESCs you can double your PI gains! ALL ESCs are flashed with the most current version of the famous  BLHeli. Future software updates can be performed through the servo cable eliminating the need for complicated flashing jigs.

    All ReadToFlyQuads ESCs come ready to fly, preset with BLHeli settings to accomodate high kv motors used in most miniquads, including the Advanced 2204 1900/2300kv, House 2300kv, or any 1806 2300kv motor etc. For most setups there is no need for further configuration.  but with the bootloader enables  all the  programming can be done via the  USB programmer over the servo line

    One BEC and three without BEC is an optimal setup for racing quad.

     

    Learn More
  10. Regular Price:

    $8.00
    View Details

    OPTO - less EMI in the multicopter frame and less heat - you get a lot of electrical noise from 4 to 8 high amp uBECs in a radial pattern at the centre of your multicopter

    These ESCs will give your multi rotor quicker reflexes, less drift, and smoother flights. These are so fast, compared to standard ESCs you can double your PI gains! ALL ESCs are flashed with the most current version of the famous SimonK firmware. Future software updates can be performed through the servo cable eliminating the need for complicated flashing jigs.

    **Currently we are flashing them with SimonK 5-15-13 firmware to be compatible with the Sunnysky X2204 motors, etc.

    Get one normal and three without BEC is an optimal setup for racing quad 

    12 Amp RapidESC BLHeli multi can also be flashed. For most users we find SimonK plays best with almost all flight controllers, for an amazing flight. If you want to play around with BLheli, try to changing Standard config to:1. timing set to med-hi, 2. demag compensation set to off, may require more changes for your battery/motor setup. For more info on BLHeli go here 

    Learn More

Grid List

Set Descending Direction

21-30 of 36