All FC's are Tested and Shipped w/ NEWEST BetaFlight 3.4.0(July 8th)! Departing from Florida, U.S.A.  

20-30 Amp

Grid List

Set Descending Direction

41-50 of 59

  1. Regular Price:

    $12.00
    View Details

    Be a Star with the Fastest, Strongest, most simplest mini ESC in town. Damped Light (Active Braking); OneShot125 Enabled with a Jumper. Each unit is powered up at RTF to check for working order. We want to make certain one is getting a working product when it leaves the door, get in the with no delay with DOA ESCs.

    Dampend light enabled and OneShot125 compatible
    BEC: None
    Lipo Cells: 2 to 4 cells
    Processor: Atmel
    Firmware: Anti-fire enabled
    Max continuous load: 30 amps
    Burst Current: 20A/30sec
    BEC: None
    Dimensions 12mm L x 23mm W x 3mm H

    2g Bare BEC. 

    Learn More
  2. Regular Price:

    $11.00
    View Details

     IN STOCK AND READY TO SHIP! 

    Loaded with the Newest Blheli 14.6 Firmware Or Blheli 14.6 Multishot 

    FVT LITTLEBEE 20A ESC Supporting 2-4S - these ESCs have been the closest performing ESCs to KISS, mosfet driven with fast, dedicated driver chips on quality PCB. This gives you excellent freewheeling and exceptional braking. The next generation in speed controllers! With Silabs processor and gate-drivers which makes the motor braking especially fast. These are OPTO ESCs - this means that you will need your own 5 volt BEC to power your flight controller.  Do not forget a RTF 1V-17V ADJUSTABLE VOLTAGE REGULATOR

    Comes with bootloader enabled. Do not forget a ESC programmer.

    Full warranty  for any defective product. Please contact us if you have any problem upon arrival! Fly with confidence!

    Enable Racing Mode! (Dampened Light Mode) - Enable racing mode! For True Plug and Play settings, more flying and less time on the bench. Racing mode is pre-programmed and optimized for best performance by quadcopter racers  - ready for just about any motors - OneShot is included/Ready - we recommend not  to alter our BL-Heli settings for racing quads. Race mode changes over 10 Settings for maximum performance: PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance! Pair with a Flip32 for automatic detection of all the advantages of Oneshot123. Newest BL-Heli 14.6 Firmware ships out pre-programmed and tested.  

    Learn More
  3. Regular Price:

    $12.00
    View Details
    Loaded with the Newest Blheli 14.6 Firmware Or Blheli 14.6 Multishot.  New ESC. with 390 CPU. Up to 4s- 30A Supported, with no cap.Aikon sports a  thicker PCB, more capacitance and a switching 3.3v regulator rather than the linear regulator. Sports to be the most reliable mini-ESC with the Strongest, Smallest, and fastest IC drivers and FETS See Test Results below. BlHeli 14.6 pre-flashed and ReadyToFly, All flashing done in house, making sure you do not get stuck with old firmware .cooler then the Littlebee and put out more thrust. See pictures.. 30AMP with with dedicated drivers and very fast fet switching. Another big player tossing their hat in ring! The smallest ESC to date. These are opto, so do not forget a RTF 1V-17V ADJUSTABLE VOLTAGE REGULATOR
    Comes with BlHeli bootloader installed, and flashed with newest BlHeli 14.6 Firmware  installed and tested!. Plus we pre-calibrate the throttle range so all ESC's start and reach full throttle at the exact same time. The 20 Amp ESCs BLHeli ships out pre-programmed and optimized for best performance - pre-configured - OneShot is included/ready, Great for Dampened Light settings. RUNS COOLER AND STRONGER THEN LITTLEBEE. ALSO THE SAME SIZE!
     
    Enable Racing Mode! (Damped Light Supported)
    Enable racing mode! Settings are changed/tuned for better handing during Racing!: BlHeli 14.6 Firmware! For True Plug and Play settings, more flying and less time on the bench. Racing mode is pre-programmed and optimized for best performance by quadcopter racers  - ready for just about any motors - OneShot is included/Ready - for new and starting Flights we recommend not  to alter our BL-Heli settings for racing quads. Race mode changes over 10 Settings for maximum performance: PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance! Pair with a Flip32 for automatic detection of all the advantages of Oneshot123. Newest BL-Heli 14.6 Firmware ships out pre-programmed and tested.
     
    Features - BlHeli 14.6 Firmware Installed! 
    Continuous Current:30A - high capacity current
    Processor: SiLabs F390 -highspeed refresh rates
    Servo Cable Flashable: Bootloader: BlHeli
    Burst Current(10s):40A
    Battery:2-4 Lipo
    Max Power:880W
    Length:mm
    Width:mm
    Height:mm
    Weight:g

    Active Braking / Damped Light / Comp_PWM Supported
    AutoShot (OneShot125 / FastPWM Auto Detect)
    Customized to drive all motors without sync issues or cogging.
    To enable new features on Baseflight:
    - On Configuration tab, check "Enable OneShot" and "Enable FastPWM"
    - Scroll down and click "Save"
    To enable new features on Cleanflight:
    -On Configuration tab, check the "Enabled" box next to "ONESHOT125" Feature
    -Scroll down and click "Save"

    Learn More
  4. Regular Price: $9.00

    Special Price $8.50

    View Details
    Flashed with newest 2016-04-15- march firmware installed and tested! We get Factory Direct. All of the units shipped are manufactured 4/6/2015  They are ready to ship, ESC only orders will ship in less then 24 hours. The date code are 4.2016 Date code . Every unit tested under load, and solder visually inspected. BUY WITH CONFIDENCE, These ESC have overcome been obsessively engineered and now Strongest, Smallest, fastest, most reliable mini-ESC around!!! Zero PCB failure rate in batch testing! 
     
     SimonK firmware including OneShot auto-detect is the perfect ESC to use on mini FPV quads.  The ESC comes pre-loaded with the newest firmware, which is compatible with new features like "OneShot" (auto-detect if OneShot is enabled), Comp PWM (similar to KISS braking feature)
    ESC Features:
    Specially for Multi-copter, throttle respond fast;
    Suit for throttle, which can compatible well with motor;
    Throttle signal is twisted pair cable, reduce the crosstalk while the signal transfer by the copper wire and flight more stable; 
    The maximum refresh frequency up to 500Hz throttle signal, compatible with all flight controls;
    Use new process ultra-low resistance MOSFET with miniaturization, and all flashes are N MOS with high withstanding current;
    Minaturization design, Mini16/20A with high performance capacitor fliter on the board, weight reduce to 2g, also already thicken the PCB copper specially and low heat for small aircraft.

    Specification:

    Voltage: 6-16.8V(2-4S LiPo)
    Output Current: 20A
    BEC: Without
    Signal frequency: 20-500Hz
    Output PWM frequency:18KHz
    Firmware:SimonK firmware w./ bootloader
    Weight:2.0g(without wires)
    Size:23*12*4.5mm

    Learn More
  5. Regular Price: $9.00

    Special Price $8.50

    View Details
    Flashed with newest BlHeli v14.4 (4.2016) firmware installed and tested! We get Factory Direct. All of the units shipped are manufactured 4/15/2016  They are ready to ship, ESC only orders will ship in less then 24 hours. The date code are 4.2016 Date code. March  Every unit tested under load, and solder visually inspected. BUY WITH CONFIDENCE, These ESC have overcome been obsessively engineered and now Strongest, Smallest, fastest, most reliable mini-ESC around!!! Zero PCB failure rate in this batch! 
    ESC Features:
    Specially for Multi-copter, throttle respond fast;
    Suit for throttle, which can compatible well with motor;
    Throttle signal is twisted pair cable, reduce the crosstalk while the signal transfer by the copper wire and flight more stable; 
    The maximum refresh frequency up to 500Hz throttle signal, compatible with all flight controls;
    Use new process ultra-low resistance MOSFET with miniaturization, and all flashes are N MOS with high withstanding current;
    Minaturization design, Mini16/20A with high performance capacitor fliter on the board, weight reduce to 2g, also already thicken the PCB copper specially and low heat for small aircraft.
    Enable Racing Mode! (Dampened Light Supported)
    Settings are changed/tuned for better handing during Racing!  : PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance!  Pair with a Flip32 for automatic detection of all the advantages of Oneshot123
    • Specification:
    • BlHeli pre-flashed  14.3
    • Damped Light Ready; Oneshot Ready
    • Oneshot Ready (plug and play with flip32)
    • Small (kiss size) (only 2 grams without wires)
    • Up to 600Hz signal
    • ultra-low resistance all MOSFET design
    • BLHeli or simonK bootloader enabled
    • Flashable via the servo leads
    • Voltage: 6-16.8V(2-4S LiPo)
    • Output Current: 20A
    • BEC: Without
    • Signal frequency: 20-500Hz
    • Output PWM frequency:18KHz
    • Firmware:BLHELI-(ONESHOT)
    • Weight:2.0g(without wires)
    • Size:23*12*4.5mm
    Learn More
  6. Regular Price:

    $9.00
    View Details

    The Mini 20A features a UBEC and is the smallest 20A ESC With a BEC built in, for the builds when one do not have to worry about another 5v power suppy to power there flight controller.

    The RTF Mini 20 amp ESC with customized SimonK firmware including OneShot auto-detect . Small in size (27x14.5x6mm)  supporting 20A on 4s. The ESC comes pre-loaded with the newest firmware, which is compatible with new features like "OneShot" . No soldering a jummper pad required, it will auto-detect if OneShot is enabled), Comp PWM (Dambed light), compatible with all Lumenier motors up to 4 cell.

    The RTF 20 amp AutoShot ESCs have been tested and are compatible with all of your motors and many more with , 2S-4S, both 5" and 6" props without sync loss issues or cogging.

    The Simonk AutoShot firmware is pre-calibrated with endpoints 1060us - 1860us. This corresponds to the default endpoints in both Baseflight and Cleanflight. Therefore, "Calibration" procedure is not necessary. 

    Enable Racing mode:  We will turn on Comp_PWM + Motor_adacance timing. This can also be changed with the radip flash chrome app . All esc come with a bootloader. 

    Features

    Active Braking / Damped Light / Comp_PWM
    AutoShot (OneShot125 / FastPWM Auto Detect)
    Customized to drive all motors without sync issues or cogging.
    To enable new features on Baseflight:
    - On Configuration tab, check "Enable OneShot" and "Enable FastPWM"
    - Scroll down and click "Save"

    To enable new features on Cleanflight:
    -On Configuration tab, check the "Enabled" box next to "ONESHOT125" Feature
    -Scroll down and click "Save"

    Specifications

    Max continuous load: ~20 amps
    Burst Current: 30A/10sec
    BEC: 5v/1amp max
    Lipo Cells: 2 to 4 cells
    Cables are fitted with female 2mm bullet connectors
    Weight: 4g (board) 8g (total with wires and connectors)
    High quality N-FET only flashed with SimonK firmware and 5v 1A BEC
    Dimensions

    27mm L x 14.5mm W x 6mm H
    100mm signal wire / 5v power
    50mm motor wires 
    70mm ESC power wires

    Dampened Light supported - OneShot125  autodeacte Compatible

    Specifications

    • BlHeli: Dampend light supported and OneShot125 compatible
    • Max continuous load: 20 amps
    • Burst Current:  30A/30sec
    • BEC: 5v/1amp max
    • Lipo Cells: 2 to 4 cells
    • Processor: Atmel
    • Refresh Rate: 600hz 
    • Default timing: Medium ((Recommended for 2204) (Med-High Recommened for 2206))
    • Servo Cable Flashable - via Afro Stick, MT1501, Or nano Flasher (Arduino Nano)

    Dimensions

    • 27mm L x 14mm W x 5mm H
    • 10g with wires
    • 4g no wires (bare)
    Learn More
  7. Regular Price:

    $9.00
    View Details

    Flashed with newest BlHeli firmware installed and tested!

    The Mini 20A features a UBEC and is the smallest 20A ESC With a BEC built in for the builds when one do not have to worry about another 5v power suppy to power there flight controller.

    Dampened Light supported - OneShot125  autodeacte Compatible

    Specifications

    • BlHeli: Dampend light supported and OneShot125 compatible
    • Max continuous load: 20 amps
    • Burst Current:  30A/30sec
    • BEC: 5v/1amp max
    • Lipo Cells: 2 to 4 cells
    • Processor: Atmel
    • Refresh Rate: 600hz 
    • Default timing: Medium ((Recommended for 2204) (Med-High Recommened for 2206))
    • Servo Cable Flashable - via Afro Stick, MT1501, Or Beast-Mode Flasher (Arduino Nano)
    • 27mm L x 14mm W x 5mm H
    • 10g with wires
    • 4g no-wires (bare)
    Learn More
  8. Regular Price:

    $13.00
    View Details

    new 3.0. New and Improved LDO, layout and pads, now with HIGHER RATED CAPACITORS INSTALLED & IMPROVE PAD AND PLACMENT. NOw Flashed with the newst BLHELI 14.3!  This 18A Version uses higher rated top notch fets which are able to withstand higher currents compared to the 12A Version.Supporting the highest cell count for the Smallest ESC in its class, just 2g bare PCB. 2-6s compatible. Yes. up to six (6s) cell support. 

    RTF Bear HugESCs were developed to hug your multicopter frame, maximizing performance, so you can kiss your racing foes goodbye . Featuring ultra light weight construction with excellent thermal properties for an ESC - the MOSFETS are specifically selected to run BLHeli with the least amount of heat production and highest efficiency.  Users will need to install wires (INCLUDED). Clock and Data lines are on "easy" to solder for easy prgamming. The newest BLHeli (multirotor) Installed and Tested

    Enable Racing Mode! (Dampened Light Mode) - Enable racing mode! For True Plug and Play settings, more flying and less time on the bench. Racing mode is pre-programmed and optimized for best performance by quadcopter racers  - ready for just about any motors - OneShot is included/Ready - we recommend not  to alter our BL-Heli settings for racing quads. Race mode changes over 10 Settings for maximum performance: PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance! Pair with a Flip32 for automatic detection of all the advantages of Oneshot123. Newest BLHeli 14.3 Firmware ships out pre-programmed and tested.  

    -Reverse motor direction easily
    -Supports damped light mode,demag, timming, and countless other settings
    - Pads on edge for easy programming ! (see pic)
    - Advantages of further advancements in BLHeli by flashing new firmware
    -Set other parameters such as beacon, PPM range etc
    - Many setting for any  motor/battery/prop combo

    Features
    All Nfets - 14.3.0.2 Firmware 
    18Amp constant(In good air flow)
    Easy to reach programing pads
    NO BEC OPTO!
    2s and 6S Capable (yes. 4S please)
    Ultra light weight 2g PCB.  couple more grams with all motors and power wires. 
    400hz and 490hz compatible - DJi, naze32, cc & MultiWii tested with mni motors to 25,000rpm
    Size:  22mmX12mm

    3.0V  NOW SHIPPPING : HIGHER RATED CAPACITORS INSTALLED  :  IMPROVE PAD AND PLACMENT 

     

    Learn More
  9. Regular Price:

    $9.00
    View Details
    RTF Hug+ VH 20A ESCs brings the reliability and dependability you have come to expect from the hugsESCs series but with more power! In a light package, featuring damped light and Oneshot capability.  Many months in testing we wanted to bring something that will keep hugging you for more when you push your quad to the limits., We tested many Mosfets and picked the best ones for active braking properties . The new Hug+ HV are the ultimate ESC for miniquad racing and freestyle racing, now 4s supported.  They are made for Racing MultiCopters - specifically to run at 4S. They also feature ultra light weight construction with excellent thermal properties for a ESC - the MOSFETS are specifically selected to run with the least amount of heat production and highest efficiency. For Cleanflight ,Baseflight, Tau Labs, MultiWii, any flight code which is OneShot enabled - these ESCs are OneShot auto-detect ready.

    The RTF 20Amp ESC Simonk ships out pre-programmed and optimized for best performance - pre-configured - AutoShot is included/ready autodected. ESCs are shipped ready to go - flashed with BLHeli 14 and damped light enabled (option). I highly recommend picking up USB programmer. These are opto, so do not forget a RTF 1V-17V ADJUSTABLE VOLTAGE REGULATOR

    We also have units pre-soldered with all the wires soldered. PWM, Power, and motor wires solder and ready to go. 

    These ESC's have the SimonK Bootloader enabled so they can easily be flashed using the USB Linker/afro linker/Nano linker tools.

    • Oneshot capable (automatic detection) 
    • damped light enabled, (as option)
    •  fast high side switching
    • no big radial electrolytic capacitor
    • 20A continuous 30 A Bust 
    • NO BEC. LESS EMI, NO HEAT
    Learn More
  10. Regular Price:

    $9.00
    View Details
    RTF Hug+ VH 20A ESCs brings the reliability and dependability you have come to expect from the hugsESCs series but with more power! In a light package, featuring damped light and Oneshot capability.  Many months in testing we wanted to bring something that will keep hugging you for more when you push your quad to the limits., We tested many Mosfets and picked the best ones for active braking properties . The new Hug+ HV are the ultimate ESC for miniquad racing and freestyle racing, now 4s supported.  They are made for Racing MultiCopters - specifically to run at 4S. They also feature ultra light weight construction with excellent thermal properties for a ESC - the MOSFETS are specifically selected to run with the least amount of heat production and highest efficiency. For Cleanflight ,Baseflight, Tau Labs, MultiWii, any flight code which is OneShot enabled - these ESCs are OneShot auto-detect ready. Download software here

    The RTF 20Amp ESC BL-Heli ships out pre-programmed and optimized for best performance - pre-configured - OneShot is included/ready autodected. ESCs are shipped ready to go - flashed with BLHeli 14 and damped light enabled (option). I highly recommend picking up USB programmer to change any settings. These are opto, so do not forget a RTF 1V-17V ADJUSTABLE VOLTAGE REGULATOR

    Enable Racing Mode! (Dampened Light Supported)

    Enable racing mode to change over 10 Settings for maximum performance: : PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance!  Pair with a Flip32 for automatic detection of all the advantages of Oneshot123

    The main advantages of BL-Heli software is the use Active free wheel and active braking (PWM Damping) Dampened Light - 14.0.0.2 is OneShot ready for Flip32 - this actively slows the prop/motor down on one side of your Quad, while speeding the prop on the other - without "active-braking" the prop has to slow by inertia and drag alone - this DAMPING Light mode puts the brakes on - the Racing Quad handles better - but you must also increase "P" slowly in 0.1 increments to see the full benefits. Boot-loader enabled! This means all the settings can be changed over the servo cable with a simple pro mini+ftdi combo

    These ESC's have the SimonK Bootloader enabled so they can easily be flashed using the USB Linker/afro linker/Nano linker tools.

    • Oneshot capable (automatic detection) 
    • damped light enabled, (as option)
    •  fast high side switching
    • no big radial electrolytic capacitor
    • 20A continuous 30 A Bust 
    • NO BEC. LESS EMI, NO HEAT

    We also have units pre-soldered with all the wires soldered. PWM, Power, and motor wires solder and ready to go. 

    Learn More

Grid List

Set Descending Direction

41-50 of 59