Flight Controller Tested and Flashed shiped BetaFlight 4.0.5 (8/7/2019)! Departing from Florida, U.S.A.  

Frame Parts/Standoff

Grid List

Set Descending Direction

11-20 of 44

  1. $6.99

    Features:

    2oz copper & 4-layers PCB.
    Low Ripple current
    ESC & Battery solder tabs in pairs.
    Solder Bridges of various voltage for Camera & VTX.
    DC/DC synchronous buck regulator, Efficiency is up to 95%.
    5V & 12V Output LED indicators & Short circuit tolerant.


    Specification:
    Working Voltage: 3~6S LiPo
    Output Voltage: 5V&12V
    Output Current: 2A
    ESC outputs: 4
    Current output:4*20A
    Size: 36*36mm
    Weight: 5.5g
    Mounting: 30.5mm / Φ3mm

    Learn More
  2. $4.85

    This feature packed board has power distribution for your ESC in a resonable layout .Packed also with a LC,and 5V 12V bec output,power for OSD,camera,LC filter to avoid the noise. BOARD 2OZ COPPER

    Next version of the popular 12 & 5v PDB - this version also incorporates an lc filter and has osd Passthrough so you can easily connect up your FPV Gear

    User selectable Voltages for your camera and Vtx

    This tiny size PDB is packed with goodies. Built in 12V and 5V regulators is a great way to power up your electronics with enough current to power them all. Built in LC Filter can supply clean power to your video equipment for reliable picture. This 2oz copper layer PDB can handle large currents and can run on up to 6S battery power.

    Specification:

    BEC output: 5V/12V
    Input voltage: 2-6S
    Weight: 6g
    Max output current: 3A
    With LED indicators
    With LC filters
    Size:30.50x30.50mm
    Package included:

    1 x Power distribution board

    Learn More
  3. $17.00

    This feature packed board has power distribution for your ESC in a reasonable layout .Packed also with a LC,and 5V 12V bec output,power for OSD,camera,LC filter to avoid the noise.

    Includes a full Minim OSD - you can use the popular MWOSD which in the latest beta includes support for betaflight or any of the other popular variants of the minim osf firmware.This also includes most of the features of the Power pro  including the LC filter, 12 & 5v bec.

    Can be run stand alone without a flight controller connection to provide battery voltage and powered up time - or combine with a gps for a stand alone option in a fixed wing.This has been pre bridged with the most popular voltage out options for camera and vtx but if you do need 5v rather than 12v to your camera or vtx it is easy adjusted.  Also like the PBD if you are running 3s you have the option of feeding the 12v output direct from the battery or through the regulator - most other boards don't give you that option.Easy solder pads for your esc's with the option to feed the esc wires up from underneath for a clean build.35x35mm with 30.5mm mounting holes so it is easily stack-able with your existing mini quad flight controller

    Learn More
  4. $3.50

    Features:

    2oz copper
    Small and Light.
    Can power the 12V camera & 12V LED without ripple & noise.
    Support 3-4S Lipo input.

    Specifications:

    Item Name: RTF V5.0 Power HUB
    Working Voltage: 3~4S LiPo
    Linear Output Voltage: 5V&12V
    Linear Output Current: 500mA(4S IN),200mA(6S IN)
    ESC outputs: 4
    Current output:4*20A
    Size: 36*36mm
    Weight: 3.5g
    Mounting: 30.5mm / Φ3mm


    Package Included:

    1 x PDB

    Learn More
  5. $1.99

    Features:

    2oz copper
    Small and Light.
    Can power the 12V camera & 12V LED without ripple & noise.
    Support 3-4S Lipo input.

    Specifications:

    Item Name: RTF V5.0 Power HUB
    Working Voltage: 3~4S LiPo
    Linear Output Voltage: 5V&12V
    Linear Output Current: 500mA(4S IN),200mA(6S IN)
    ESC outputs: 4
    Current output:4*20A
    Size: 36*36mm
    Weight: 3.5g
    Mounting: 30.5mm / Φ3mm


    Package Included:

    1 x PDB

    Learn More
  6. $2.50

    RGB LED Circle X9 LED /12V Lighting System

    RGB LED CIRCLE X9/12V comes with NINE RGB5050 LEDs & one Dip switch. Using the Dip switch you can select seven bright colors. The board is even small enough to fit under some motors to give great orientation for your multirotor.

    This LED board gives an eye-catching effect to your multirotor or plane. SUPER BRIGHT WITH NINE 5050 LEDS!

    Comes with Two sets (four points) of solder points, Pads, and through-holes for pins headers . perfect for JST plugs, and chaining 

    Specs:
    Input: 10~15 DC (3-4S LiPoly)
    Size: Circle  Φ30mm (10mm /Φ3mm mounting hole)
    Weight: 2.5g

    Selectable Colors & Power @12v:
    B ON = Blue, 0.6W, 0.05A
    R ON = Red, 0.6W, 0.05A
    G ON = Green, 0.6W, 0.05A
    B+R ON = Magenta, 1.2W, 0.1A
    B+G ON = Cyan, 1.2W, 0.1A
    R+G ON = Yellow, 1.2W, 0.1A
    B+R+G ON = White, 1.80W, 0.15A

    Learn More
  7. $3.99

    Features:

    Small and Light.
    2oz copper.
    DC/DC synchronous buck regulator, Efficiency is up to 95%.
    Can power the 12V camera & 12V LED without ripple & noise.
    Support 3-6S Lipo input.

    Specifications:

    Working Voltage: 3~6S LiPo
    Output Voltage: 5V&12V
    Output Current: 2A
    ESC outputs:4
    Current output:4*20A
    Size: 36*36mm
    Weight: 3.5g
    Mounting: 30.5mm / Φ3mm


    Package Included:

    1 x PDB

    Learn More
  8. $2.25

    Features:

    2oz copper
    Small and Light.
    Can power the 12V camera & 12V LED without ripple & noise.
    Support 3-4S Lipo input.

    Specifications:

    Item Name: RTF V5.0 Power HUB
    Working Voltage: 3~6S LiPo
    Linear Output Voltage: 5V&12V
    Linear Output Current: 500mA(4S IN),200mA(6S IN)
    ESC outputs: 4
    Current output:4*20A
    Size: 36*36mm
    Weight: 3.5g
    Mounting: 30.5mm / Φ3mm


    Package Included:

    1 x PDB

    Learn More
  9. $1.99

    Features:
    Small volume
    Easy to use


    Specifications:
    Size: See below photo
    Weight: 2g


    Package included:
    Mini Camera Lens adjustable Mount *1

    Learn More
  10. $1.99

    Features:
    Small volume
    Easy to use


    Specifications:
    Size: See below photo
    Weight: 3.3g


    Package included:
    Mini Camera Lens adjustable Mount *1

     

    Learn More

Grid List

Set Descending Direction

11-20 of 44