Flight Controller Tested and Flashed shiped BetaFlight 4.0.5 (8/7/2019)! Departing from Florida, U.S.A.  

Lights

Grid List

Set Descending Direction

11-20 of 20

Page:
  1. 1
  2. 2
  1. $3.25

    controllable via CleanFlight compatible flight controllers like the Flip32+  Flip32. 

    This Programmable LED bar has 8 RGB WS2812 LED's set up in series.  These bars are 70mm long and 9mm wide with two mounting holes 35mm apart.  You can connect two or more of these LED strips together, cleanflight will support up to 32 Programmable LED's.

    Watch the following video to learn more about programming LED's with Cleanflight and our Flip32 . Flip32+

    These get connected to channel 5 inout .  make sure when you "chain" then make sure you chain . output to input in the next led strip. 

    small video on setup 

    Learn More
  2. $1.95

    Four strips . 3 LEDs per strip .  on a hard back pcb in white, red, blue, and green. Works on 3-4S power.

    Learn More
  3. $5.00

    Add cool led light show to your flight conrtoller . Build onboard is  a small 1A BEC to power a flight controller.  great for when you have opto escs. like the hugs 

    J1= 5+Volts   J2=Ground 

    • # of ESC pads - 12
    • Current - 100A Max
    • Outer Diameter - 77mm
    • Inner Diameter - 40mm
    • Max input voltage - 6S
    Learn More
  4. $3.50

     Weight: 20g

    you can change change color. the flashing modes and more.

    Fits on the bottom of a Flip/FPV/Sport arm.

    12 VOLTs ,

    super bright. 

    Learn More
  5. $5.00

    One of the most fun things to do with a multirotor is night flying.  It's easier to see, there is no sun in your eyes, and it looks truly amazing.  I've tried many different ways to illuminate my quads, and these Turnigy lights are simply the best thing ever made for night flying.  I've flown some incredible distances at night, much further than I would ever consider flying during the day because the quad is so much easier to see.  I use them even during the day for orientation because they will never become just a black shadow in the distance like a red arm will ... you will always know which way the quad is facing.  Of course the UFO reports around my neighborhood are entertaining as well :)

    Turnigy High Density light strips come with 60 LEDs per meter, and the LEDs are arranged in sets of 3. This allows you to cut the strip into smaller strips (there are white dividing lines between each set of 3 leds).  Typically one strip will do two arm plates with a small amount left over.  They will run from a 11.1v 3s lipo and can be powered from your flight battery directly.


    Features:

    Comes with adhesive tape backing for easy mounting

    Flexible enough to be bent at any angle

    Easy to use. Just peel and stick!

    Large voltage input range up to 12V DC! (Great for 2-3S Lipoly) 

    Specifications:

    Standard length: 1 meterStrip

    width: 8mmLED quantity per strip(1 mtr): 60 LEDs

    Working voltage: DC12V

    Working current(1mtr): 400mA

    Weight including wire(1mtr): 11g Certification: CE & Rohs

    Learn More
  6. $0.75
    View Details

    Powered by its own battery is this little light fits in the center of the frame very nicely and can light up your orientation ball at night.

     

    Learn More
  7. $5.00

    One of the most fun things to do with a multirotor is night flying.  It's easier to see, there is no sun in your eyes, and it looks truly amazing.  I've tried many different ways to illuminate my quads, and these Turnigy lights are simply the best thing ever made for night flying.  I've flown some incredible distances at night, much further than I would ever consider flying during the day because the quad is so much easier to see.  I use them even during the day for orientation because they will never become just a black shadow in the distance like a red arm will ... you will always know which way the quad is facing.  Of course the UFO reports around my neighborhood are entertaining as well :)

    Turnigy High Density light strips come with 60 LEDs per meter, and the LEDs are arranged in sets of 3. This allows you to cut the strip into smaller strips (there are white dividing lines between each set of 3 leds).  Typically one strip will do two arm plates with a small amount left over.  They will run from a 11.1v 3s lipo and can be powered from your flight battery directly.


    Features:

    Comes with adhesive tape backing for easy mounting

    Flexible enough to be bent at any angle

    Easy to use. Just peel and stick!

    Large voltage input range up to 12V DC! (Great for 2-3S Lipoly) 

    Specifications:

    Standard length: 1 meterStrip

    width: 8mmLED quantity per strip(1 mtr): 60 LEDs

    Working voltage: DC12V

    Working current(1mtr): 400mA

    Weight including wire(1mtr): 11g Certification: CE & Rohs

    Learn More
  8. $5.00
    1meter Learn More
  9. $5.00
    1 meter Learn More
  10. $5.00
    1 Meter .

    blue

    LEDs are arranged in sets of 3, you can cut the strip and make new strips or extend strips to make any combination of 3 lights Learn More

Grid List

Set Descending Direction

11-20 of 20

Page:
  1. 1
  2. 2