These are ESC's with EZ connectors build in. Servos are now having the plug built in,instead of a hard soldered wire, allowing for a very clean install. Leading the way of the future, you can now connect these ESC directly to the mega proEZ boards! With EZ connectors on the programming port for future live output monitoring, or super easy re-flashing of the firmware.
These ESCs will come un-soldered with no signal wire : 1. use old wire from older bad esc or servos, ect... or 2. Select and signal cable option at the bottom.
We did not skimp on the hardware, like our fire red series these are simply the best ESC you can get for your multirotor hands down..
Flashed with the newest SimonK-(RapidESC) firmware . Up to 600Hz input rate is supported, with immediate updates to motor pwm duty.
- All N-channel FETs
- External Oscillator
- Boot-loaded Enabled
- Up to 4s Four cell Battery Supported
- 30 amp ESC
- Heat-sink w/ thermal pad
- Spare Power and motor wires
Note:It will come with no signal cable unless you select the correct cable option at the bottom:
150MM size cables are great for Flip Sport size frames.
300MM size cables are perfect for Flip FPV size frames.