RTF Mini "4-in-1" 12-Amp 35x35
Maximize all the performance you can out of your multirotors. Featuring ultra light weight construction with excellent thermal properties for an ESC - the MOSFETS are specifically selected to run SimonK with the least amount of heat production and highest efficiency. Users will need to install cap and wires.
All Nfets (bsnfet.hex)
12Amp constant with 15Amp burst (per channel)
Built in 5v-1A Linear BEC
2 and 3S Capable (no 4S please)
Ultra light weight -10g with cap and signal wires. 16grams with all motors and power wires.
400hz and 490hz compatible - DJi, naze32, cc & MultiWii tested with mni motors to 25,000rpm
Size: 35mm (L) * 35mm (W) * 6mm (H)
uSEC range These are programmed to SimonK - idle ≤1064 - mid 1464 - high throttle ≥1864 uSec
Signal and motor cables are included.
New internal construction
Smaller 25v cap.
Please Note: This is for advanced users.
This is not for the timid solderer; there are very small solder pads. Watch your spacer size, the clearance is minimal. 3mm spacers work best, but you still need to file down the thick edges. If you are not comfortable with a soldering iron, please see our B-12A esc.
5-15-13 simonK firmware installed for best compatibility with high kv motors.