We are quickly shipping orders with a 1man clean environment for your safety. (3/2/2020) Departing from Florida, U.S.A.  

RTF Motor 2204 - 2300KV - House PRO Series (CCW & CW)

RTF Motor 2204 - 2300KV - House PRO Series (CCW & CW)

Availability: Out of stock

Multicopters control their flight by rapidly changing RPM every few deci-seconds - so the RTF motors are light weight and uses a light weight prop and prop adapter.  These Motors are custom wound copper packed in tight to give a kva of 2300ka.  This makes them work well on 3S 12.4v using any 6 Inch prop or the 5 inch triples or the 7 inch or even the 5 inch Blunt nose Props. Push the limits with 4s on a 6x3 prop! Unlimited power.  Importantly - We also always specified our motors with high end NMB™ miniature metric bearings for long lasting flight

Featureing the new PRO line. Unmatched motor magnets, winding / wires. balance  and bearing. high qualit cnc milling like our advance line  

Out of stock



Brand new 2300kv model designed specifically for the mini-quads !  This is motor will turn any your quad into a stable rocket, and give you power to spare. 

Replaced with new Integrated prop adapter  New motor. Super powerful.  These Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All RTF Motors are shipped in a custom designed packages.

These 2204 series motors have a 3.0mm shaft for extra strength, as well as oversize bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Silicone motor wiring extends motor leads with 2mm connetors . The extensions are 20AWG silicone wire and can be cut and soldered at any point. The motors have standard 16x19 M3 mounting threads and fit perfectly on the FPV250(X) with the motor screws supplied with the frame.

Motor Diameter : 17mm

Stator Diameter: 22mm

Stator Length: 4mm

Shaft: M5

Bottom mounting Holes: 16mm*19mm 3m

Bullet connector: 2mm


so close to sunnysky they have been nick named sunnyflys