4 IN 1 ESCs
Regular Price: $39.99
Special Price $35.99
Aikon SEFM 20A ESC is the new generation of multirotor speed controller with the latest BLHeli_S software.
now shipping v2.0 with Added fets
Aikon has been working closely with BLHeli group in developing the product for FPV racing community. The first offering of a new generation of BLHeli ESCs. Designed to bring high performance through hardware PWM and the Silabs Busybee line of microprocessors. Aikon SEFM 30A speedcontrollers. Busybee processor with hardware PWM timer. Has smoother RPM transition compared to a 'regular' BLHeli esc.These are OPTO ESC. This means that you will need your own 5 volt bec to power your flight controller. Thr benefits are more throttle resolution, smoother response, higher RPM ability and automatic detection of OneShot 125, OneShot 42 and Multishot protocols.
Enable Racing Mode! (Dampened Light Mode) - Enable racing mode! Settings are changed/tuned for better handing during Racing!: BlHeli 14.6 Firmware! For True Plug and Play settings, more flying and less time on the bench. Racing mode is pre-programmed and optimized for best performance by quadcopter racers - ready for just about any motors - OneShot is included/Ready - for new and starting Flights we recommend not to alter our BL-Heli settings for racing quads. Race mode changes over 10 Settings for maximum performance: PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance! Pair with a Flip32 for automatic detection of all the advantages of Oneshot123. Newest BL-Heli 14.6 Firmware ships out pre-programmed and tested.
The SEFM 30A Blheli_S ESC is designed to give silky smooth feeling to the powerful arsenal of Blheli ESCs. Utilizing hardware PWM with the one of a kind EFM BusyBee 48MHz MCU power, SEFM30A coupled with Blheli_S firmware specifically written by Steffen for this ESC has truly bring the open source firmware to a whole new level.
The first offering of a new generation of BLHeli ESCs. Designed to bring high performance through hardware PWM and the Silabs Busybee line of microprocessors. Stated benefits are more throttle resolution, smoother response, higher RPM ability and automatic detection of OneShot 125, OneShot 42 and Multishot protocols.
Totally new MCU that comes with a three channel PMW output specifically designed for motor control applications and runs at 48mhz.
New BLHELI_S firmware which provides all the strengths of the original BLHELI, but adds some significant improvements such as better response and smoother start up, 1000 steps of throttle input resolution, and auto-detection of the input signal protocol.
Higher quality MOSFETs with extremely low internal resistance
Three exceptionally fast dedicated MOSFET drivers
Extra capacitance to help remove EMF spikes and keep the rest of your equipment safe.
Constant Current: 20A
Burst Current: 30A
Size: 14 x 25mm
Weight (with wire) 9g
Signal Wire Length: 150mm
Battery Wire Length: 100mm
Continuous Current: 30A
Burst Current: 40A
Input Voltage: 2S-4S LiPO
Weight: 5.5g with wires and heat shrink wrap